Drum Mill TM 300 XL

TM 300 XL滾筒式研磨儀用于顆粒和粉末樣品的制備。滾筒式研磨儀可以通過使用相應的模塊而當做一個球磨或棒磨機進行濕磨或干磨操作，一個有效的工藝流程需要足夠數量的研磨球或棒。通常情況下終細度可以低于20微米的。
TM300XL由安裝在一個堅實的帶齒輪電機鋼架上的出口漏斗和一組分離的篩網加收集槽。TM 300 XL鎖定和控制機制使得樣品的收集很方便。滾筒蓋子的快速解鎖機制可以方便取下清洗。
研磨參數的調整：
研磨時間參數如啟動和停止，可通過顯示屏方便地設置。下列因素對終粒度有重大影響：樣品特性，大進料尺寸和容量。Retsch樂于為您的具體應制定用出合適的配置。

應用實例

semi-precious stones, 下水道污泥, 催化劑, 化學品, 合金, 土壤, 頭發, 廢棄樣品, 木頭, 木炭, 植物原料, 水泥熔渣, 涂料和油漆, 混凝土, 混合肥料, 爐渣, 煙草, 焦炭, 煤, 玻璃, 電子產品廢料, 石灰石, 石膏, 石英, 礦物, 礦石, 碳化纖維, 種子, 粘土礦物, 纖維制品, 纖維素, 紙張, 羥磷灰石, 聚合物, 膨潤土/皂土, 色素, 薄紗, 金屬氧化物, 鐵礦石, 陶瓷, 骨頭, 高嶺土, ...

Drum Mill TM 300 XL

優點

• powerful and quick grinding of large quantities
• 適合于干磨和濕磨。
• variable speed, reproducible results
• suitable for long-term operations
• ball mill and rod mill modules available
• easy tilt to empty the grinding jar
• 固體鋼鐵結構
• 可移動樣品收集裝置
• 便捷的數據顯示
• standard sizes of grinding drums from 5 to 43.4 l
• 分離網格將樣品和研磨球分開（研磨球）
• 帶手柄漏斗
• guide rail allows for ergonomic removal of drum
• grinding jar with gasket for lossfree operation
• solid noise-protection hood
• 緊急開關

性能指標

Please note:
受樣品材料性質和儀器配置/設定的影響

作用原理

In a drum mill the sample (usually pre-crushed material) is placed inside the drum with the grinding media (grinding balls or rods) and subjected to external forces. The Ball Mill and Rod Mill Modules are used for fine grinding of solid matter by impact and friction, in wet or dry condition. The drum, which contains the sample and grinding balls or rods, rotates around a horizontal axis. Whereas particles break more easily when larger grinding ball resp. rod diameters are used, smaller diameters lead to a substantially higher final fineness.

The motor of the drum mill incorporates a solid-state controller with internal overload protection which is used to set and accuray control different drum speeds.

根據技術改造和誤差調整