飛托克FITOK減壓閥，產品接口尺寸范圍：1/16"至2"，zui大工作壓力為10,000psi，使用溫度為-54℃至649℃，主體材料可選各種不銹鋼、合金、尼龍及PTFE等。
： 銷售
品名: 緊湊型減壓閥
型號描述: 316 SS PR Compact Pressure Reducing Regulator ,Cv: 0.06, Ports Style: 2 in 2 out, Inlet Pressure: 500 Psig,Outlet Pressure: 0 to 250 Psig, Inlet Ports: 1/4" Female NPT, Outlet Ports: 1/4" Female NPT, Inlet and Outlet Gauges Units: Psig, Seat Material: PCTFE, With Panel, Without Relief Valve, Cleaning and Packing: FC-02
規格型號: PMSS-E65WM-FL8-FNS8-Z-F2
品名: 中等流量減壓閥
型號描述: 316 SS Medium Flow Pressure Reducing Regulator, Cv: 1.0, Ports Style: 1 in 3 out, Inlet Pressure: 3000 Psig, Outlet Pressure: 0 to 200 Psig, Inlet Ports: 1/2" Factional Tube Fittings, Outlet Ports: 1/2" Female NPT, Inlet Gauges Units: No, Outlet Gauges Units: MPa, Seat Material: PCTFE, With Panel, Without Relief Valve, Cleaning and Packing: FC-02
規格型號: PHSS-F63MM-FNS4-FL4-ZR-F2
品名: 常規高壓減壓閥
型號描述: 316 SS General High Pressure Reducing Regulator, Cv: 0.06, Ports Style: 2 in 3 out, Inlet Pressure: 6000 Psig, Outlet Pressure: 0 to 1500 Psig, Inlet Ports: 1/4" Female NPT, Outlet Ports: 1/4" Factional Tube Fittings, Inlet and Outlet Gauges Units: MPa, With Panel, With Relief Valve, Cleaning and Packing: FC-02
規格型號: PD6L-D61BB-FNS4-FL4-V-F2
品名: 二級減壓閥
型號描述: 316L SS PD Two-Stage Pressure Reducing Regulator,Cv: 0.06, Ports Style: 2 in 2 out, Inlet Pressure: 3000 Psig, Outlet Pressure: 0 to 25 Psig, Inlet Ports:1/4" Female NPT, Outlet Ports:1/4" Factional Tube Fittings, Inlet and Outlet Gauges Units: Bar, Seat Material: Vespel, With Panel, Without Relief Valve, Cleaning and Packing: FC-02
規格型號: PL6L-A64WW-FNS12-Z-F2
品名: 低壓大流量減壓閥
型號描述: 316L SS High Flow Pressure Reducing Regulator, Cv: 1.8, Ports Style: 2 in 1 out, Inlet Pressure: 500 Psig, Outlet Pressure: 0 to 125 Psig, Inlet Ports: 3/4" Female NPT, Outlet Ports: 3/4" Female NPT, Inlet and Outlet Gauges Units: No, Seat Material: PCTFE, With Panel, Without Relief Valve, Cleaning and Packing: FC-02
飛托克(FITOK)的獨到之處有以下幾個方面：
以行業zui高標準進行設計、制造及檢驗，例如1）材料采用高于ASTM標準的、特殊定制的316不銹鋼；2）螺紋采用ANPT取代NPT，高于ASME B1.20.1標準；3）出廠前，除標準檢測外，每只閥門都用額定工作壓力的氮氣（不超過6000 psi）進行密封測試。高于其他同行的標準有效地保證了飛托克產品的*品質。
充分利用優質資源，客戶既可以選擇德國制造的質量*的產品，也可以選擇中國制造的高性價比的產品。
得益于充足的原材料庫存及柔性制造系統，能快速滿足客戶特殊材質及定制產品的需求。
業內zui寬的產品范圍及*的服務團隊，為客戶提供流體系統一站式解決方案。
