差分探頭【THDP0200】美國泰克新品差分探頭【THDP0100】
Bandwidths up to 200 MHz
Up to 6000 V Differential (DC + pk AC)
Up to 2300 V Common (RMS)
差分探頭【THDP0200】美國泰克新品差分探頭【THDP0100】的詳細資料:
深圳市金博宇科技有限公司是專業從事測試儀器儀表設備的代理經銷售后服務集成商，并與國內外儀表生產廠商有著廣泛的技術與銷售合作.作為美國菲利爾FLIR、美國FLUKE、美國泰克、美國Keithley 、美國安捷倫Agilent、中國臺灣皇晶ACUTE、英國PEM、普源精電、青島青智、費思泰克,華誼儀表，中國臺灣固緯，德國惠美, 法國CA，中國臺灣品致，長盛儀器，美爾諾，等諸多國內外代理與經銷：主要銷售的測試儀器儀表有: 示波器、信號源、萬用表、熱像儀、電流電壓探頭、電子負載、電源、頻譜、等測試儀器。。
Features & Benefits
- Bandwidths up to 200 MHz
- Up to 6000 V Differential （DC + pk AC）
- Up to 2300 V Common （RMS）
- Overrange Indicator
- Safety Certified
- Switchable Attenuation
- Switchable Bandwidth Limit
Applications
- Floating Measurements
- Switching Power Supply Design
- Motor Drive Design
- Electronic Ballast Design
- CRT Display Design
- Power Converter Design and Service
- Power Device Evaluation
Safe High-voltage Probe Solutions
Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accuray make floating measurements.
TheTHDP0100 and P5210Ahave the largest differential dynamic range capability from Tektronix, allowing users to safely measure up to ±6000 V. The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe.
TheTHDP0200 and P5205Aare active differential probes that are capable of safely measuring differential voltages up to ±1500 V. The probes are effective in making measurements in IGBT circuits such as motor drives and power converters. The THDP0200 supports bandwidths up to 200 MHz and slew rates up to 275 V/ns at 1/250 gain.
TheTMDP0200 and P5202Aare designed for medium-voltage applications with differential requirements up to ±750 V. These probes have lower attenuation ranges and offer better signal-to-noise ratio.
TheP5200Acan be used with any oscilloscope and enables users tosafelymake measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.
WARNING: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs （isolated inputs）, such as the Tektronix TPS2000 and THS3000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.
Connectivity Options
The TMDP and THDP Series probes are equipped with the TekVPI®interface which allows smart communication between the oscilloscope and probe. Pushing the probe menu button will launch the probe control menu on the oscilloscope display providing access to all relevant probe settings and controls. These probes are designed to operate on TekVPI®oscilloscopes without requiring the TPA-BNC adapter.
The P52xxA Series probes are equipped with the Tektronix TekProbe®interface which communicates scale information to the oscilloscope. Direct connections can be made to oscilloscopes configured with the TekProbe®interface or to any oscilloscope when used with the 1103 TekProbe®Power Supply.
