遮天,盗墓笔记小说txt下载,好看的课外书

~惠州費希爾閥門有限公司自成立以來，一直致力于為客戶提供全套工業閥門解決方案，專業從事工業閥門的生產、研發、銷售和服務。

公司產品覆蓋調節閥及附件、通用閥門、減溫減壓裝置、減壓閥、API6A閥門等。調節閥及附件包含有：氣動調節閥、電動調節閥、自力式調節閥、手動調節閥、氣動薄膜執行機構、電動執行機構、電氣閥門定位器、電動閥門調節模塊等。通用閥門包含有：閘閥、截止閥、球閥、蝶閥、止回閥、水力控制閥、柱塞閥、旋塞閥、隔膜閥、安全閥、減壓閥、疏水閥、排氣閥、平衡閥、針型閥及多種襯里閥門等。減溫減壓裝置分為低壓、中壓、次高壓、高壓四種規格。自動再循環控制閥分為低壓、中壓、高壓三種規格。電磁閥包含有：水用電磁閥、蒸汽電磁閥、煤氣電磁閥、空氣電磁閥等。API6A閥門包含有閘閥、節流閥等。同時，公司可按照客戶的要求進行非標產品的設計、制造、加工。

公司研發制造的：小流量控制閥，高溫高壓控制閥，多級降壓低噪聲控制閥的開發方面居于同類產品水平。所有產品的加工制造全部是在精良的生產裝備和嚴格的質量控制下進行。每道工序轉序前都經過嚴格的檢驗，合格后轉入下一工序流程，杜絕不良品的發生，從根本上保證了產品質量。通過采用高性能的生產裝備、合理的設備能力配置及高效物流管理體系，能夠保證產品的按期交貨，并在特殊情況下，滿足客戶特殊交貨的需要。

公司所有產品均能按照GB、ANSI、API、JIS、DIN、BS等標準設計、制造、加工，產品的通徑從DN3-4000mm（3/8”-60”），工作壓力從0.6—42.0Mpa（150—2500LB），同時用戶可以根據使用介質不同選用碳鋼、合金鋼、不銹鋼等材質來滿足工藝要求，強腐蝕、強沖刷，介質可以選用流道襯氟、襯陶瓷等產品來滿足；壓力范圍：PN0.25 MPa—42.0MPa（CLASS150LB—2500LB）,工作溫度范圍可滿足：（-196℃～850℃）。產品被廣泛應用于石油、化工、天然氣、

點擊展示更多內容

產品簡介在線詢價

進口氧氣減壓閥產品詳情

進口氧氣減壓閥
一、進口氧氣減壓閥產品概述
品牌：美國歐可OKE
進口氧氣減壓閥（Oxygen pressure reducing valve），也叫氧氣調壓閥，是指用于氧氣介質，閥體采用經過去油脫脂處理的不銹鋼材質，通過調節彈簧壓力設定出口壓力、利用膜片傳感出口壓力變化，通過導閥啟閉驅動活塞調節主閥節流部位過流面積的大小，實現對壓縮空氣的減壓穩壓功能。從流體力學的觀點看，減壓閥是一個局部阻力可以變化的節流元件，即通過改變節流面積，使流速及流體的動能改變，造成不同的壓力損失，從而達到減壓的目的。然后依靠控制與調節系統的調節，使閥后壓力的波動與彈簧力相平衡，使閥后壓力在一定的誤差范圍內保持恒定。

二、進口氧氣減壓閥產品特征
1、用于壓縮空氣的管道介質。
2、屬于先導活塞式減壓閥。由主閥和導閥兩部分組成。主閥主要由閥座、主閥盤、活塞、彈簧等零件組成。導閥主要由閥座、閥瓣、膜片、彈簧、調節彈簧等零件組成。控制精確。
3、通過調節調節彈簧壓力設定出口壓力、利用膜片傳感出口壓力變化，通過導閥啟閉驅動活塞調節主閥節流部位過流面積的大小，實現減壓穩壓功能。進口壓力不斷變化的情況下，保持出口聽壓力和溫度值在一定的范圍內

三、進口氧氣減壓閥技術參數及性能
公稱壓力(Mpa) 1.6 2.5 4.0 6.4 10.0 16.0
殼體試驗壓力(Mpa)* 2.4 3.75 6.0 9.6 15.0 24
密封試驗壓力(Mpa) 1.6 2.5 4.0 6.4 10.0 16.0
進口壓力(Mpa) 1.6 2.5 4.0 6.4 10.0 16.0
出口壓力范圍(Mpa) 0.1-1.0 0.1-1.6 0.1-2.5 0.5-3.5 0.5-3.5 0.5-4.5
壓力特性偏差(Mpa)△P2P ANSI2365，GB12246-1989
流量特性偏差(Mpa)P2G ANSI3568，GB12246-1989
最小壓差(Mpa) 0.15 0.15 0.2 0.4 0.8 1.0
滲漏量 X/F(聚四氟乙稀/橡膠)：O滲漏 Y(硬密封)：按ANSI6863

四、進口氧氣減壓閥額定流量系數
DN 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500
Cv 1 2.5 4 6.5 9 16 25 36 64 100 140 250 400 570 780 1020 1500

五、進口氧氣減壓閥主要零件材料
零件名稱零件材料
閥體閥蓋底蓋 WCB/FCB*
閥座閥盤 2Cr13/304*
缸套 2Cr13/25(鍍硬鉻)/304*
活塞 2Cr13/銅合金/銅合金*
活塞環 合金鑄鐵/對位聚苯*
導閥座導閥桿 2Cr13/304*
膜片 1Cr18Ni9Ti
主閥導閥彈簧 50CrVA
調節彈簧 60Si2Mn
密封墊(X/F/Y) 橡膠/聚四氟乙稀/硬質合金
導閥體導閥蓋 25/304*

六、進口氧氣減壓閥安裝說明
1、氣體減壓閥安裝必須嚴格按照閥體上的箭頭方向保持和流體流動方向一致。如果氣體不清潔含有一些雜質，必須在減壓閥的上游進水口安裝過濾器(我們建議過濾精度不低于0.5mm)。
2、為了操作和維護方便，氣體減壓閥一般直立安裝在水平管道上。
3、為了防止氣體減壓閥閥后壓力超壓，應在離閥出口不少于4M處加裝一個減壓閥。
4、減壓閥閥前和閥后必須裝截止閥，更換或者維修時開關氣體用
5、氣體如果有冷凝水的話，需要裝汽水分離器，防止冷凝水對減壓閥活塞或者膜片的損壞。

七、進口氧氣減壓閥業績
英荷殼牌石油公司，西門子股份公司，廣東華南特種氣體研究所有限公司，通用電氣公司，北京桑翌實驗儀器研究所杭州同益氣體研究所,哈爾濱工業大學，江蘇天瑞儀器股份有限公司，長沙開元儀器股份有限公司，比亞迪股份有限公司，美國德州儀器，瓦萊羅能源公司，惠州市方舟工業氣體有限公司，江蘇通廣石化工業氣體有限責任公司，杭州三泰工業氣體設備有限公司

Imported oxygen pressure reducing valve
I. Overview of imported oxygen pressure reducing valve products
Brand: US Ouke OKE
Oxygen pressure reducing valve (Oxygen pressure reducing valve) is also used for oxygen medium. The valve body is made of stainless steel which has been degreased and degreased. The outlet pressure is set by adjusting the spring pressure. The sensing outlet pressure changes, and the pilot valve is opened and closed to drive the piston to adjust the overflow area of ??the throttle portion of the main valve to realize the decompression and voltage stabilization function of the compressed air. From the point of view of fluid mechanics, the pressure reducing valve is a throttling element whose local resistance can be changed, that is, by changing the throttling area, the flow velocity and the kinetic energy of the fluid are changed, resulting in different pressure losses, thereby achieving the purpose of decompression. Then, relying on the adjustment of the control and regulation system, the fluctuation of the post-valve pressure is balanced with the spring force, so that the post-valve pressure remains constant within a certain error range.

Second, the characteristics of imported oxygen pressure reducing valve
1. Pipe medium for compressed air.
2. It belongs to the pilot piston type pressure reducing valve. It consists of two parts: the main valve and the pilot valve. The main valve is mainly composed of a valve seat, a main valve disc, a piston, a spring and the like. The pilot valve is mainly composed of a valve seat, a valve disc, a diaphragm, a spring, an adjustment spring and the like. Control is precise.
3. Adjust the outlet pressure by adjusting the spring pressure, and use the diaphragm to sense the outlet pressure change. The pilot valve is opened and closed by the pilot valve to adjust the overflow area of ??the throttle portion of the main valve to realize the pressure reduction and voltage stabilization function. Keeping the outlet listening pressure and temperature within a certain range when the import pressure is constantly changing

Third, the imported oxygen pressure reducing valve Technical parameters and performance
Nominal pressure (Mpa) 1.6 2.5 4.0 6.4 10.0 16.0
Shell test pressure (Mpa)* 2.4 3.75 6.0 9.6 15.0 24
Seal test pressure (Mpa) 1.6 2.5 4.0 6.4 10.0 16.0
Maximum import pressure (Mpa) 1.6 2.5 4.0 6.4 10.0 16.0
Outlet pressure range (Mpa) 0.1-1.0 0.1-1.6 0.1-2.5 0.5-3.5 0.5-3.5 0.5-4.5
Pressure characteristic deviation (Mpa) △ P2P ANSI 2365, GB12246-1989
Flow characteristic deviation (Mpa) P2G ANSI3568, GB12246-1989
Minimum differential pressure (Mpa) 0.15 0.15 0.2 0.4 0.8 1.0
Leakage X/F (polytetrafluoroethylene/rubber): O leakage Y (hard seal): according to ANSI 6863

Fourth, the imported oxygen pressure reducing valve rated flow coefficient
DN 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500
Cv 1 2.5 4 6.5 9 16 25 36 64 100 140 250 400 570 780

5. Imported oxygen pressure reducing valve Main parts and materials
Part Name Part Material
Body bonnet bottom cover WCB/FCB*
Seat valve disc 2Cr13/304*
Cylinder liner 2Cr13/25 (hard chrome plating)/304*
Piston 2Cr13/copper alloy/copper alloy*
Piston ring alloy cast iron / para-polyphenyl *
Guide valve seat Guide valve stem 2Cr13/304*
Diaphragm 1Cr18Ni9Ti
Main valve pilot valve spring 50CrVA
Adjustment spring 60Si2Mn
Seal (X/F/Y) Rubber / Polytetrafluoroethylene / Hard Alloy
Pilot valve body Guide valve cover 25/304*

Sixth, the installation of oxygen oxygen relief valve installation instructions
1. The gas pressure reducing valve must be installed in strict accordance with the direction of the arrow on the valve body and the direction of fluid flow. If the gas is not clean and contains some impurities, the filter must be installed at the upstream inlet of the pressure reducing valve (we recommend a filtration accuracy of not less than 0.5mm).
2. For ease of operation and maintenance, the gas pressure reducing valve is generally installed upright on a horizontal pipe.
3. In order to prevent pressure overpressure after the gas pressure reducing valve, a pressure reducing valve should be installed at not less than 4M from the valve outlet.
4. The pressure reducing valve must be equipped with a shut-off valve before and after the valve, and the switch gas should be used for replacement or maintenance.
5. If the gas has condensed water, it needs to be equipped with a steam separator to prevent the condensate from damaging the piston or diaphragm of the pressure reducing valve.

Seven, the performance of imported oxygen pressure reducing valve
Royal Dutch Shell Oil Company, Siemens AG, Guangdong Huanan Special Gas Research Institute Co., Ltd., General Electric Company, Beijing Sangqi Experimental Instrument Research Institute Hangzhou Tongyi Gas Research Institute, Harbin Institute of Technology, Jiangsu Tianrui Instrument Co., Ltd. Changsha Kaiyuan Instrument Co., Ltd., BYD Co., Ltd., Texas Instruments, Valero Energy, Huizhou Fangzhou Industrial Gas Co., Ltd., Jiangsu Tongguang Petrochemical Industrial Gas Co., Ltd., Hangzhou Santai Industrial Gas Equipment Co., Ltd.

關鍵詞：過濾器截止閥

熱門產品

產品名稱	參考價	地區	公司名稱	更新時間
TESCOM 調壓器	面議	上海市	上海霄鵬自動化科技有限公司	2025-02-28	在線詢價
CAMOZZI微型比例調壓器中文樣本	面議	上海市	上海乾拓貿易有限公司	2025-03-03	在線詢價
意大利CAMOZZI比例調壓器LR-ZB250CN	面議	上海市	上海乾拓貿易有限公司	2025-02-24	在線詢價
NUMATICS機械調壓器	面議	上海市	上海乾拓貿易有限公司	2025-03-01	在線詢價
-接觸調壓器/三相調壓器	面議	北京市	北京亞歐德鵬科技有限公司	2018-03-11	在線詢價
大功率控溫調壓器	面議	北京市	北京同德創業科技有限公司	2025-03-02	在線詢價

免責申明

所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，儀表網對此不承擔任何責任。儀表網不涉及用戶間因交易而產生的法律關系及法律糾紛，糾紛由您自行協商解決

友情提醒：本網站僅作為用戶尋找交易對象，就貨物和服務的交易進行協商，以及獲取各類與貿易相關的服務信息的平臺。為避免產生購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。過低的價格、夸張的描述、私人銀行賬戶等都有可能是虛假信息，請采購商謹慎對待，謹防欺詐，對于任何付款行為請您慎重抉擇！如您遇到欺詐等不誠信行為，請您立即與儀表網聯系，如查證屬實，儀表網會對該企業商鋪?zhàn)鲎N處理，但儀表網不對您因此造成的損失承擔責任！

相關產品分類更多+