廣州西門子變壓器有限公司是一家大型中德合資企業，西門子占總股份的63%，廣州電氣裝備集團有限公司占股份的37%，是技術的變壓器制造廠商之一。公司總資產超過10億元人民幣，是廣東省裝備制造業重點培育企業之一，連續多年獲得“中國電氣工業”榮譽稱號。
公司成立于1998年，占地面積65,000平方米，擁有員工500多名。我們致力于為電力系統、工業以及樓宇用戶提供1000kV及以下油浸式電力變壓器、±800kV及以下高壓直流換
流變壓器，20MVA/35kV及以下樹脂澆注式變壓器產品及相關服務，是國內為數不多的、
可以在同一個工廠生產各電壓等級變壓器的公司之一。自1999年9月15日投產以來，公司已為中國和海外客戶提供了1000多臺電力變壓器和大量配電變壓器，并贏得了良好的聲
譽。
Siemens Transformer (Guangzhou) Co.,Ltd. (Original VA TECH ELIN Transformer
Guangzhou Co., Ltd.) is a large Sino-German joint venture with 63% of the total shares
held by Siemens and 37% shares held by Guangzhou Electric Equipment Group Co., Ltd..
We are one of the global technology leaders in transformer industry with total assets
more than USD 200 million. And as one of the key enterprises of Guangdong equipment
manufacturing industry, our company has been listed in “Top 100 Electrical Enterprises
in China” for several years.
Our company was established in 1998 covering the lａnd of 65,000 m2
with more
than 500 employees. We provide power transformers up to 1000kV and cast-resin
transformers up to 20MVA/35kV with related service to utilities、industry and building
customers. We are one of the few companies who are able to manufacture full voltage
range transformers in the same plant in China. Our company has established a good
reputation with more than one thousａnd high reliable power transformers and a large
quantity of distribution transformers in China and overseas from September 15, 1999.
從1965年起，西門子樹脂澆注變壓器已經成功運行。超
過80,000臺西門子樹脂澆注變壓器通過配電或者整流系統中
的安全運行證明了自身的質量。
西門子樹脂澆注變壓器的環氧樹脂、固化劑、石英粉、絕
緣材料等主要材料采用進口，更好的保證了其高品質。
GEAFOL®和CARECO®分別是西門子鋁和銅變壓器的注冊商
標。西門子樹脂澆注變壓器集高性能、低損耗優點于一身，
是工業應用領域的品牌。
SIEMENS Cast-resin distribution transformer (CRT) has been in
successful service since 1965. Over 80,000 units SIEMENS CRT have
proven themselves in power distribution or converter operation all
around the globe.
Epoxy resin, curing agent, quartz powder, insulating materials and
other major material of SIEMENS CRT are imported to ensure the
high quality.GEAFOL® and CARECO® are registered trademarks of
SIEMENS aluminium and copper transformer respectively. SIEMENS
CRT is recommended for industry application due to its perfect
combination of high performance and cost economics.
防火安全
西門子樹脂澆注配電變壓器只使用阻燃與自熄材料，不使用
額外的材料，比如三水氧化鋁等會影響樹脂澆注體機械穩
定性的材料。電氣故障造成的內部電弧與外部火災不會導致
變壓器爆炸或燃燒。撲滅火源后，變壓器會自熄。這種設計
獲得了許多國家的消防機構認可，可用于居民樓等類型的建
筑。經過多次試驗證明變壓器的燃燒殘渣對環境沒有危害。
Fire safety
SIEMENS CRT use only flame-retardant and self-extinguishing
materials in their construction. NO additional substances, such as
aluminum oxide trihydrate, which could negatively influence the
mechanical stability of the cast-resin molding material, are used.
Internal arcing from electrical faults and externally flames do not
cause the transformers to burst or burn. After the source of ignition
is removed, the transformer is self-extinguishing. This design has
been approved by fire officials in many countries for installation in
populated buildings and other constructions. The environmental
safety of the combustion residues has been proven in many tests.
服務咨詢：
儀表技術群：
