8400-B001系列踏板稱重傳感器，用于踏板操作力
-
Features
- 非常扁平的設計
- 對作用于運行方向的力不敏感
- 易于更換，符合人體工程學的操作盤
- 溫度范圍-40°C至120°C
- 與TRANS CAL 7281結(jié)合使用，可便攜式且獨立于網(wǎng)絡使用
- 選項：提供雙量程版本
-
Product data
型號 8400-B001 量程范圍 0 … 1000 N 0 … 2000 N 受力方向 壓力 標準化信號 信號輸出 保護等級 IP 67 過載保護 拉盤 受力壓頭 使用溫度范圍 -30 ... +80 °C 具體特點 - 非常扁平的設計
- 對作用于運行方向的力不敏感
- 易于更換，符合人體工程學的操作盤
- 溫度范圍-40°C至120°C
- 與TRANS CAL 7281結(jié)合使用，可便攜式且獨立于網(wǎng)絡使用
- 選項：提供雙量程版本
-
Description
With its flat construction this force sensor is specially designed to be fitted to a pedal. By this, the operator's forces for each respective action, for example brake tests, can be measured directly and the reaction of the vehicle or machine can be designated. This applies to real test drives, as well as in driving simulators. Due to the special construction of the membrane, it is irrelevant whether an upright or hanging pedal is concerned. The sensor is designed in a way that unavoidable lateral forces have as little impact on the measurement result as possible. Using a central internal thread on the control surface, various machine-related adaptor parts can be easily mounted. Because the pedal is convex-shaped on its surface, the pedal force sensor has a very rigid base plate and therefore can easily be applied to various geometrics. The mounting can even take place on a pedal with an elastomer covering.
With a height of only 17 mm, this sensor is particularly flat and, in its assembled state, does not interfere with the operation task of the pedal. Additionally, its diameter of less than 60 mm makes this sensor suitable for almost all forms of pedals. The sensor is screwed together in a safe and stable way with a suitable bracket which goes under the pedal. Due to various pedal designs, this bracket is not included in the delivery scope and has to be manufactured separately to fit to the pedal. The connection cable is specially protected, it sturdily holds using PG cable glands and is suitable for robots: Therefore lots of movements in realistic, dirty and damp areas are guaranteed. On the measurement membrane in addition to its stable mechanics several bridges formed by strain gauges protect the sensor from additional transverse forces. The operator provides, from personal factors such as foot position, habits or various shoes, inevitably off-centre forces on the operating part of the sensors, which need to be compensated.
-
Downloads
Data sheet
8400 EN
Related products
8431,8432系列
