德國耶拿11-0402-001-21氘燈
多功能燃燒管402-889.510
德國耶拿 Analytik Jena燃燒管 402-889.510ye
德國耶拿 Analytik Jena燃燒管 402-885.010
德國耶拿 Analytik Jena燃燒管 402-890.134
多功能燃燒管402-889.510
德國耶拿 Analytik Jena燃燒管 402-889.510
德國耶拿 Analytik Jena燃燒管 402-885.010
德國耶拿 Analytik Jena燃燒管 402-890.134
德國耶拿進樣隔墊 402-889.557 Sealing disk, 17 mm, for plastic cap GL 18 resp. for waste vessel of sampler, set of 5 pieces
德國耶拿 402-886.305 500µl SYR H ø8Vent 1/4"-28 RN 1,0x0,7c51
德國耶拿 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
德國耶拿 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces
德國耶拿402-889.186 Removable special needles, set of 3 pieces
Consumables multi EA 5000
402-889.527 Auto-Protection valve assembly, complete
no picture available
B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces
402-889.652 Flow test kit
no picture available
A 402-889.182 Wires for cleaning syringe needles, set of 10 pieces
402-007.513 FAST connector, 1 piece
(adaptor angeled for gas tubings, black)
402-801.317 Fuse for furnace unitT 10 A H, 20 mm
402-820.044 Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece
402-889.510 Multi purpose combustion tube
B 402-825.045 Tweezers, straight, truncated
B 402-889.092 Sample vials, 2 ml, set of 100 pieces
(for sample rack with 112 positions)
402-889.558 PTFE filter plate, d = 25 mm (Auto protection replacement filter) Set of 5 pieces
402-820.129 Oxygen and argon gas supply tubing
FEP, OD 6 mm (sold by meter), 1 m
A 402-889.306 Screw cap with hole, GL 18
402-889.557 Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces
402-889.583 Special sealing 12 mm
(FAST connector at outlet of multi purpose combustion tube)
402-822.118 Heat resistent gloves, 1 pair
Sampling modules
MMS 5000
402-812.374 Replacement screw
(mounting of autosampler on the basic unit/ ABD)
A 402-823.079 Removable needles for 50 and 100 μl syringes, set of 3 pieces
402-886.248 Waste hose
A 402-889.206 Septum for rinsing vessel
402-889.533 Syringe 50 μl, with removable needle, without markings
402-889.534 Syringe 100 μl, with removable needle, without markings 402-889.547 Gripper for sample boats
Autoinjector
402-889.589 Syringe 10 μl, for Autoinjector, with removable needle
recommended for higher element concentrations and systems with carbon module
402-889.592 Syringe 100 μl, for Autoinjector, with removable needle
402-889.590 Syringe 20 μl, for Autoinjector, with removable needle
recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)
402-889.591 Syringe 40 μl, for Autoinjector, with removable needle
recommended as standard syringe for N/S systems
A 402-889.186 Removable special needles, set of 3 pieces
402-815.839 Sealing for sample port MBD
402-889.671 Feed tube for MBD
402-889.672 Hook for MBD
402-889.670 MBD coupling tube, glass
402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces
402-889.560 Set of sealing elements horizontal 402-889.673 Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
Automatic boat drive - ABD
402-889.551 ABD coupling tube, glass
402-886.236 Sealing for sample port ABD
A 402-881.028 Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing
A 402-889.073 Feed tube, for MVS shunt/ABD
A 402-889.066 Hook, for MVS shunt/ABD
suitable from MVS serial number 509 046 and higher
402-815.838 O-ring 14 mm x 4 mm for ABD
402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces
402-889.560 Set of sealing elements horizontal
A 402-889.050 Septum; 12.5 mm; set of 5 pieces
402-889.673 Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
A 402-889.039 Adsorption material, set of 3 pieces
Gas Sampling System - GSS
B 402-889.148 Replacement septum for gas sampling bag 10 l, 1 piece
402-820.057 Ferrule 1/16", 1 piece
multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece
402-820.123 Ferrule for injection needle, vertical operation, 1 piece
B 402-889.147 Gas sampling bag 10 l for GSS and GSS type C, 1 piece
A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation
402-889.423 Septum perforated for special needle PEEK in horizontal operation mode
A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK
LPG Module and GSS/LPG combi module
402-889.439 Bubble vessel
402-820.057 Ferrule 1/16", 1 piece
multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece
402-820.123 Ferrule for injection needle, vertical operation, 1 piece
A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation mode
A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)
multi EA 5000: for bubble vessel
A 402-881.116 O-ring, i.d. = 6 mm x 3 mm
multi EA 5000: for screw cap GL 14 bubble vessel
402-889.423 Septum perforated for special needle PEEK in horizontal operation mode
A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK
402-889.061 Extended Sulfur Calibration Kit; 0,05 - 10 mg/l
402-889.060 Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l B 402-889.070 Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank
B 402-889.167 Sulfur Calibration Kit (10 - 100 mg/l) incl. blank
B 402-889.164 Sulfur Calibration Kit (100 - 500 mg/l)
B 402-889.069 Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank
B 402-889.165 Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank
B 402-889.162 Nitrogen Calibration Kit (100 - 500 mg/l)
A 402-823.048 Membrane dryer
B 402-815.030 O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces
multi EA 5000: sealing for inner part of membrane dryer
Sulfur Coulometer
A 402-889.313 Absorber tube for Sulfur coulometer, glass
402-820.110 Connecting hose 1/8", (sold by meter), 1m
A 402-889.302 Diaphragma for titration cell of Sulfur coulometer
A 402-889.308 Sealing for screw cap with hole, GL 32, Sulfur coulometer
A 402-889.309 Sealing for screw cap with hole, GL 14, Sulfur coulometer
402-889.307 Sealing for screw cap with hole, GL 18, Sulfur coulometer
A 402-889.311 Gas introduction tube for titration cell of Sulfur coulometer, glass
A 402-520.137 Glass screw joint (gray)
multi EA 5000: (Screw joint for tube 8 mm)
A 402-889.301 Indicator electrode for titration cell of Sulfur coulometer
A 402-889.303 Cathode for titration cell of Sulfur coulometer
A 402-889.310 Stirrer bar, titration cell, Sulfur coulometer
402-884.015 Packet with one charge of silver wool
A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes, Sulfur coulometer
A 402-889.306 Screw cap with hole, GL 18
A 402-889.304 Screw cap with hole, GL 32 Diaphragma, Sulfur coulometer
A 402-889.314 Septa for titration cell for Sulfur Coulometer, set a 50 pieces
402-889.300 Titration cell for Sulfur coulometer, glass
A 402-889.312 Fitting GL zz, for absorber tube, sulfur coulometer
TC/TOC-Module
B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection
B 402-885.019 Halogen absorber, complete with U-tube
402-810.050 Halogen absorber filling (copper- and brass wool)
A 402-885.017 High-temperature mat, set of 3 pieces
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation mode
402-889.657 Condensation coil
no picture available
B 402-810.059 Special catalyst platinum, sufficient for 5 refills
A 402-810.048 Special catalyst platinum, one refill
B 402-886.318 Sample vials, 8 ml
50 mm x 18 mm, 125 pieces
A 402-884.005 Pump hose for peristaltic pump, waste
A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g
A 402-825.044 Quartz wool, 1 packet
402-889.659 Septum TIC vessel
402-889.658 Septum combustion tube
no picture available
402-881.245 Set of TC prefilter and water trap
402-889.594 Syringe 250 μl with vent and removable needle
(for autosampler)
402-889.593 Syringe 500 μl with vent and removable needle
(for autosampler)
402-889.656 TIC vessel
A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber
(without connections)
no picture
available
402-889.655 Combustion tube
Chlorine Detection
402-815.831 Hose to connect suction extractor at workplace or vent
lengh 70 cm
402-889.549 Connecting part (metal) for gas transfer line
with outside thread
402-825.123 Beaker for sulfuric acid vessel
402-889.561 Replacement hose for heated gas transfer line
402-820.053 Ferrule for connecting part (metal)
for gas transfer line with outside thread
402-820.055 Ferrule for screw joint
gas transfer line with inside thread
402-889.559 Gas transfer hose
B 402-889.071 Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B 402-889.166 Chlorine Calibration Kit (10 - 100 mg/l) incl. blank
B 402-889.163 Chlorine Calibration Kit (100 - 500 mg/l)
A 402-520.177 ferrule set, 1/4" TFE
402-30003 Ferrule set, 1/8" PTFE
402-825.124 Petri dish for sulfuric acid vessel
402-889.569 Tubing inside sulfuric acid vessel with ferrule
402-889.508 sulfuric acid vessel with outlet
402-889.507 Safety cowl for the sulfuric acid tank
402-825.108 Funnel for sulfuric acid vessel
402-889.573 Connector sulfuric acid vessel
A 402-30031 Swagelok screw fitting, 1/4" onto 1/8", PTFE
Chlorine detection with chlorine module high sensitive
B 402-890.007 Storage vessel for sensor electrode
A 402-889.085 Mounting to connect suction extractor at workplace, NS
14.5 brown glass
402-99998 preamplifier for sensor electrode
A 402-889.123 Gas introduction tube
A 402-889.124 Set of rubber plugs; 1 x NS14, 1 x NS7
A 402-889.112 Internal electrolyte sensor electrode, 50 ml
A 402-815.023 Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece
A 402-889.006 Platinum electrode
A 402-889.184 Electrolyte bridge
B 402-889.110 Salt solution to make up 100 ml electrolyte
A 402-889.002 Sensor electrode 402-889.536 Silver electrode
Chlorine detection with titration cells sensitive and high concentration
402-889.538 Storage vessel for combination electrode
B 402-880.605 Disposable tube 18 mm x 6 mm, filled
packet of 10 pieces, for AOX determination (column method)
402-890.610 Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)
A 402-880.211 Combination electrode (ceramic)
A 402-815.022 Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece
402-889.673 Sample boat, special, with downholder for special applications
402-889.510 Multi purposecombustion tube
402-825.045 Tweezers, straight,truncated
402-889.092
Sample vials, 2 ml, setof 100 pieces
402-889.558
PTFE filter plate, d =25 mm (Aurotection replacementfilter)
402-820.129
Oxygen and argon gassupply tubing
402-889.306
Screw cap with hole,GL 18
402-889.557
Sealing disk, 17 mm,for plastic cap GL 18,set of 5 pieces
402-889.583
Special sealing 12 mm
402-822.118
Heat resistent gloves,1 pair
402-889.597
combustion tube fordiesel exhaustparticulates multi EA5000
402-812.374
Replacement screw
402-823.079
Removable needles for50 and 100 μl syringes,set of 3 pieces
402-886.248
Waste hose
402-889.206
Septum for rinsingvessel
402-889.533
Syringe 50 μl, withremovable needle,without markings
402-889.534
Syringe 100 μl, withremovable needle,without markings
402-889.547
Gripper for sampleboats
402-889.589
Syringe 10 μl, forAutoinjector, withremovable needle
402-889.592
Syringe 100 μl, forAutoinjector, withremovable needle
402-889.590
Syringe 20 μl, forAutoinjector, withremovable needle
402-889.591
Syringe 40 μl, forAutoinjector, withremovable needle
402-889.186
Removable specialneedles, set of 3pieces
402-815.839
Sealing for sample portMBD
402-889.671
Feed tube for MBD
402-889.672
Hook for MBD
402-889.670
MBD coupling tube,glass
402-889.674
Quartz boat, 40 mm x9 mm, set of 10 pieces
402-889.560
Set of sealingelements horizontal
