中壓離心風機
SCF-BM Medium pressure centrifugal fan
型號: SCF-BM (中壓離心風機)
風量可達:350~55,000 m3/h
靜壓可達:400~12,000Pa
重量:40~800kg
功能:普通排風、工藝送排風及防爆排風
特點:
1.采用后彎離心設計理念，反復經CFD流場模擬優化設計，不過載、效率高、氣流穩定；
2.風機葉輪都經過動態平衡試驗，達到G4.0的平衡等級；
3.葉片等離子切割工藝，精密夾具定位，半自動焊接平臺，焊接牢固美觀，每個葉輪經時效去應力處理， 運行平穩可靠；
4.傳動形式直聯，聯軸器或皮帶驅動；
5.風機表面經過打磨清理，除去焊渣、 毛刺、銳邊、 油污，經高溫環氧樹脂噴涂；
6.風機軸應是通過精車調質處理的，其負載應大于風機運行速度的150%，軸應當加軸護罩。皮帶輪為SP系列帶輪，按照功率的150%選型，皮帶輪、皮帶配置有護罩；
7.蝸殼自帶檢修門，方便葉輪及蝸殼除垢；
8.蝸殼可選出風方向；
9.材質可選：CS/304/304L/316L等。
Model: SCF-BM（Medium pressure centrifugal fan）
Volume up to:350~55,000 m3/h
Static pressure up to:400~12,000Pa
Weight:40~800kg
Applications:General ventilation, Industrial ventilation and Explosion proof exhaust
Characteristics:
1. Back curved centrifugal blade is simulated and optimized repeatedly through CFD flow field, with features of non-overloading, high efficiency and stable flow;
2. Each impeller is dynamically and statically balanced to G4.0;
3. With plasma cutting technology, precise central positioning, semi-automatic welding platform, excellent welding ,as well asinner stress diminishing treatment, each impeller runs smoothly and reliably;
4. Direct drive, coupling or belt drive are available;
5. The surface is treated with high temperature epoxy resin spray after grinding, removal of slag, burr, and dust pollution;
6. The shaft should be tempered and polished with a maximum load more than 150% of the maximum speed of the fan, and the shaft should be covered with a shaft shield; Belt pulley is SP belt wheel, selected according to over 150% of power, belt wheel and belt are equipped with protective cover;
7. The housing is self-equipped with access door for ease of clean and dirt removal;
8. The housing is available for different discharge directions;
9. Material optional: CS/304/304L/316L and so on.
