朗戈流休設備是采用技術,引進品牌和資本建立的專業生產制造不銹鋼上等衛生級和無菌級離心泵,自吸泵及轉子泵的杰出企業.
朗戈公司引進*的專業加工設備,擁有****套全自動衛生級泵的測試系統,嚴格根據歐洲EHEDG.美國營商業3A和國際GMP等標準制造衛生泵,擁有功率從1.1KW~45KW等一百多等規格型號的產品.
朗戈泵廣泛用于食品飲料,乳品,啤酒釀造,生物工程,醫藥及精細化工等行業.產品以NISSIN品牌或者OEM出口到世界近30個國家,擁有可口可樂,百事可樂,伊利乳業,金威啤酒,健力寶,娃哈哈,匯源果汁,燕京啤酒等杰出客戶.
LANKO was established on the basis of foreign advanced technology, brａnd and capital. Nissin is a famous and professional enterprise, specialized in producing stainless steel superior sanitary and aseptic centrifugal pumps, liquid-ring pumps and lobe pumps.
LANKO owns the most advanced professional manufacturing equipments and the first one set of fully-automatically sanitary pump testing system in China. Nissin produce sanitary pumps strictly according with Europe standard EHEDG, America Standard 3A, and China standard GMP, etc. Nissin has more than 100 models of pumps; the ranges of power are from 1.1Kw to 45Kw.
LANKO pumps are widely used in the industries of Food, Beverage, Brewery, Biochemical engineering, Pharmaceutical, Fine Chemical, etc. Pumps are made in the brａnd of Nissin or in the way of OEM to export to nearly 30 countries in the world. Nissin’s customers include: Pepsi-cola, CoCa-cola, Yili Dairy, Kingway Brewery, Wahaha, Huiyuan Fruit Juice, Yanjing Beer, etc.
應用:
朗戈衛生型離心泵可廣泛適用于各類液體物料的輸送.如乳品,啤酒,飲料,醫藥,生物工程,精細化工等領域.它不但可以輸送普通的低,中粘度溶液,也可以輸送含懸浮物或有腐蝕性的溶液.日新衛生型離心泵的形式工業基礎單級,單級,開式葉輪.泵殼,葉輪經精心設計,減小了阻力,消滅了衛生死角.由于其特殊的結構,所以提高了泵內液體的流速,從而提高了泵的整體性能,且易于清洗,具有**的衛生性能.它可以滿足產品對衛生,柔性處理的要求并具有耐化學腐蝕性能.
標準設計:
LCP泵由以下部分組成:標準的馬達,葉輪,泵殼,衛生機械密封.它具有專為就地清洗系統(CIP)設計的內部和可清洗的密封.LCP泵有一個不銹鋼的外罩可保護馬達,還有四個可調節的不銹鋼支腳.
軸封:
LCP泵裝有一個平衡型單端面機械密封或一個可沖洗的平衡型單端面機械密封.這兩種機械密封的靜環由AISI316L鋼內嵌碳化硅或石墨構成,動環則由碳化硅制成.可沖洗機械密封的輔助密封是一個經久耐用的唇形密封.SCP10B~SCP25B型泵的機械密封為雙端面機械密封.
Application
LANKO sanitary pump is applicable in conveying all kinds of liquid material in the industries of Dairy, Beer, Beverage pharmaceutical and chemistry .it conveys not only normal low or middle viscous solutions but also suspension and corrosive fluids .nissin sanitary centrifugal pump has types of single state, single suction and open styled impeller. with its elaborate design in shell and impeller, resistance is reduced and unhygienic dead angle is thoroughly eliminated, due to its special structure, the liquid flow speed in the pump is promoted to its whole performance, also it has an easy access for cleaning which presents its outstanding sanitary features, it meets the product gentle treatment requirements as well as anti-chemical-chemical-corrosive character
Standard design
the LCP pump consist of a standard motor, impeller, pump casing and sanitary mechanical shaft seal, the LCP pump is designed for CIP with emphasis on large internal rounding and cleanable seals, LCP has a stainless steel shroud for protection of the motor ,ａnd the complete unit is supported on four adjustable stainless steels.
Shaft seal
The LCP pump is equipped with either an single or a flushed shaft seal, both have stationary seal rings in acid resistant steel AISI316L with sealing surface in carbon or carbide and rotating seal rings in silicon carbide. the secondary seal of the flushed seal is a long lasting lip seal.LCP10B to 25Bbmay also be equipped with a double mechanical shaft seal.
材質:
過液部分材質: AISI316L不銹鋼
其它部分材質: AISI304不銹鋼
外表面: 鈦色
內表面: 拋光
過液密封材料: EPDM乙丙橡膠
技術參數:
*大入口壓力: 0.5MPa
溫度范圍: -10℃到140℃(EPDM)
噪聲水平(1米處) 小于85dB(A)
可沖洗密封:
水壓: *高0.1 MPa
水量: 0.25-0.5L/min
雙端面密封:
水壓: *高0.6 MPa
水量: 0.25-0.5L/min
電壓和頻率: 3-,50HZ,220～240V/380～420V/660～690V, ⊿/Y
電機型號: 50HZ:1.5,2.2,3,4,5.5,7.5,11,15KW
Materials
Product wetted steel parts: acid resistant steel AISI 316L
Other steel parts: stainless steel aisi304
Outside surface: Ti
Inside surface: bright
Product wetted seals: EPDM rubber
Technical date
Max. Inlet pressure: 0.5MPa
Temperature range: -10℃to+140℃(EPDM)
Noise level (at 1m) <85dB (A)
Flushed seal
Water pressure: max.0.1 MPa
Water consumption: 0.25-0.5l/min
Double mechanical seal:
Water pressure: max.0.6 MPa
Water consumption: 0.25-0.5l/min
Voltage and frequency:3-,50HZ,220～240V/380～420V/660～690V, ⊿/Y
Motor sixes: 50HZ: 1.5, 2.2, 3, 4, 5.5, 7.5, 11,15KW
