華儀7480耐壓儀器1000VA交流耐壓測試儀
簡單介紹
交流耐壓輸出容量可達1000VA, 跳脫電流(Ir) 200mA · 測試電壓 ACW : 0-5000Vac 全范圍輸出可調 華儀7480耐壓測試儀-10000VA
華儀7480耐壓儀器1000VA交流耐壓測試儀的詳細介紹
特點:
· 交流耐壓輸出容量可達1000VA, 跳脫電流(Ir) 200mA
· 測試電壓 ACW : 0-5000Vac 全范圍輸出可調
· 磚利智能型防高壓觸電 Smart GFI 功能
· 電壓可設定輸出緩升(Ramp Up) 與緩降 (Ramp Down) 功能
· 測試時間單位可設定 秒(Sec.) / 分(Min.) / 時(Hour) 三種選擇
· 可搭配矩陣掃描儀器(7006 Matrix Scanner ) 達到多通道輸出應用
· 50個記憶組, 每個記憶組可設定步驟連結(Step Linking)
· 內建PLC Remote 遠程控制界面 Test / Reset 及 三組記憶M1/M2/M3
· 可選配RS-232 通訊界面, 滿足自動化控制需求
· EXTECH VA交流耐壓測試儀,
華儀7480耐壓測試儀-10000VA產品規格:
| SPECIFICATIONS | |||
| MODEL | 7480 | ||
| Output Rating | 5KVAC/200mA | ||
| AC WITHSTAND VOLTAGE | |||
|
| Range | Resolution | Accuracy |
| Output Voltage, ACV | 0 - 5000 | 10 | ±(2% of setting + 10V) |
| Output Frequency | 50Hz/60Hz ± 0.1%, User Selection | ||
| Output Waveform | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 | ||
| Output Regulation | ± (1% of output + 10V), From no load to full load | ||
| SETTINGS | |||
| Hi / Lo -Limit AC Current, mA | 0.00 - 99.99/ 100.0 - 200.0 | 0.01/0.1 | ±(2% of setting + 2counts) |
| Ramp Up Time, second | 0.1 - 999.9 | 0.1 | ±(0.1% + 0.05sec) |
| HI and LO-Limit (Real), current, mA | 0.0 - 999.9 | 0.1 | |
| Dwell Time | 0, 0.3 - 999.9 sec (0=continuous) | 0.1 | |
| 0, 0.1 - 999.9 min (0=continuous) | 0.1 | ||
| 0, 0.1 - 999.9 hr (0=continuous) | 0.1 | ||
| Arc Detection | 1 - 9 Ranges(9 is the most sensitivity) | ||
| AC Current Offset, mA | 0 - 2.000 or Auto Set | ||
| MEASUREMENT | |||
| AC Voltage, KV | 0 - 5.00 | 0.01 | ±(2% of reading + 2counts) |
| AC Current, mA | 0.00-20.00 | 0.01 | ±(2% of reading + 3counts) |
| 20.1-200.0 | 0.1 | ||
| GENERAL | |||
| Input Voltage AC | 230VAC ± 10% , 50/60Hz (Input 110V has to add Transformer Box) | ||
| PLC Remote Control | Input : Test , Reset , Memory1.2.3 ,Interlock | ||
| Output : Pass , Fail , Processing | |||
| External Scanner Poert | Build-in only one Scanner Port to connect 7006 Matrix Scanner. | ||
| Safety | Smart-GFI Function (<1mA) | ||
| Memory | 50 memories | ||
| Display | 20*2 LCD with back light | ||
| Key Lock | To prevent unauthorized alteration of the test Parameters | ||
| Calibration | Build-in software and external calibrated meters | ||
| Interface | RS232 (Option) | ||
| Alarm Volume Setting | 10 ranges set by the numeric keys on the front panel | ||
| Environment | 0-40℃, 20-80%RH | ||
| Dimension | 430mm(W)×133mm(H)×500mm(D) | ||
| Net Weight | 24.4Kg | ||
| STANDARD ACCESSORIES | |||
| Power Cord | ×1 | ||
| Fuses | ×2 (Including a spare contained in the fuse holder) | ||
| Interlock Disable Key (1505) | ×1 | ||
| Hipot Return Lead | ×1 | ||
| Hipot Test Lead | ×1 | ||
