大功率2651A 型數字源表進一步豐富了2600A 系列產品。該源表專門針對大功率電子器 件的特性分析和測試而優化設計，可幫助用戶在研發、可靠性及生產領域提高生產力，包 括高亮度LED、功率半導體、DC/DC 轉換器、電池，以及其他大功率材料、元件、模塊 和組件的特性分析和測試。
與2600A 系列產品的每個成員一樣，2651A 具有高靈活性、四象限電壓和電流源/負載， 組合了精密電壓和電流表。該源表可作為：
? 半導體特征分析儀
? 電壓或電流波形發生器
? 電壓或電流脈沖發生器
? 精密電源
? 真電流源
? 數字多用表(直流電壓，直流電流，電阻和功率，分辨率達5?位)
? 精密電子負載
主要特性：
? 源或阱：
- 2,000W脈沖功率(±40V，±50A);
- 200W直流功率(±10V@±20A、±20V@±10A、±40V@±5A)
? 方便地連接兩個單元(串聯或并聯)形成±100A 或±80V 解決方案
? 1pA 分辨率，可精密測量極低的漏電流
? 1μs/點(1MHz)，連續18 位A/O 轉換器，精確的瞬態特性分析
? 1%至99%脈沖占空比，適用于脈寬調制(PWM)驅動型器件和特殊驅動類型期間的激勵
? 組合了精密電壓源、電流源、數字多用表、任意波形發生器、電壓或電流脈沖發生器及測量、電子負載及觸發控制器——多功能一體的儀器
? 包括TSP®Express 特性分析軟件、LabVIEW®驅動，以及吉時利的Test Script Builder(測試腳本編輯器)軟件開關環境。
典型應用：
? 功率半導體、HBLED 和光器件特性分析和測試
? GaN、SIC 及其他復合材料和
器件的特性分析
? 半導體結溫度特性分析
? 高速、高精度數字化
? 電遷移研究
? 大電流、大功率器件測試
兩種測量模式：數字化或積分
2651A 型有兩種測量模式可對瞬態和穩態行為進行精密地特性分析，包括快速變化的熱 效應。每種模式均由其獨立的模/數(A/D)轉換器定義。
在數字化測量模式下，連續進行1μs/點采樣，每秒可捕獲1,000,000 個讀數。其18 位 A/D 轉換器使用戶能夠精密測量瞬態特性。對于更準確的測量，可利用基于22 位A/D 轉 換器的積分測量模式。全部2600A 系列儀器均具有積分測量模式。
Main features:
? source or well:
-2,000w pulse power (40V, 50A);
- 200W dc power (10V@ 20A, 20V@ 10A, 40V@ 5A)
? easily connect two units (in series or parallel) to form 100A or 80V solutions
? with 1pA resolution, extremely low leakage current can be accurately measured
? 1 s/ point (1MHz), continuous 18-bit A/O converter, accurate transient analysis
? 1% to 99% pulse duty cycle, suitable for excitation during pulse width modulation (PWM) driven devices and special drive types
? combination of precision voltage source, current source, digital multimeter, arbitrary waveform generator, voltage or current pulse generator and measurement, electronic load and trigger controller -- multi-functional instrument
, including TSP ® Express characteristics analysis software, and LabVIEW ® drive, as well as keithley Test Script Builder software switch environment (Test Script editor).
Typical applications:
? power semiconductor, HBLED and optical device characteristics analysis and testing
? GaN, SIC and other composite materials and materials
Analysis of device characteristics
? analysis of semiconductor junction temperature characteristics
? high-speed and high-precision digitalization
? electromigration studies
? testing of high-current and high-power devices
Two measurement modes: digital or integral
Type 2651A has two measurement modes for precise characterization of transient and steady-state behavior, including rapidly changing thermal effects. Each mode is defined by its own independent A/D converter.
Continuous 1 s/ point sampling in digital measurement mode can capture 1,000,000 readings per second. Its 18-bit A/D converter enables users to accurately measure transient characteristics. For more accurate measurements, an integral measurement mode based on A 22 bit A/D converter can be used. All 2600A series instruments have integral measurement mode.
