型號描述
該傳感器 Cube 測量渾濁程度。該傳感器是為應用于在線分析系統（型號：8905）的流體 Backplane 上而設計的。 濁度的光學測量工作根據DIN EN ISO 7027 的規定執行。持續分析水的濁度可以發現，是否有材料意外地未溶于水中。過濾前后的測量結果可以顯示過濾器的過濾效果，并有助于優化回流沖洗流程等。這可能有利于節約水和能源。 須通過系統中的 Backplane 建立電氣和流體連接。 該傳感器 Cube 通過 büS 與系統進行通信，借此在線分析系統可實現全自動化信息通報。若將傳感器嵌入系統中，它將被列入 büS 參與者列表中，而且可以根據客戶要求作出進一步的調整。
1）兼容于 büS 系統和諸多其他的傳感器 Cube
2）光學傳感器符合 DIN EN ISO 7027 的要求，90°紅外漫射光
3）熱插拔功能允許在運行期間更換傳感器 Cube
4）測量水耗實現最小化
Type Description
The device is a turbidity measurement sensor. It is used within the Online Analysis System Type 8905 by being plugged into a spare fluidic backplane slot. The device contains an optical sensor following DIN EN ISO 7027 or optional according to EPA methode 180.1. The turbidity of water needs to be analysed continuously as indicator for unwanted undissolved content in the water. Measurement prior and post filtration indicates the effect of filtration and may help to optimise the filter backwash process. In the best case it can lead to water and energy savings. The electrical and fluidic connections are made via the connection panel of the system. The sensor cube is communicating via büS, so the recognition at the Online Analysis System is fully automatic. When plugged into a system you will find the sensor in the list of büS members for further customized adjustments.
1）Fully compatible with büS systems and a wide range of further analysis sensor cubes
2）Optical sensor according to DIN EN ISO 7027 or EPA Methode 180.1
3）Modular sensor cube for hot swap (exchange during operation)
4）Minimal sample water flow needed
