干式恒溫解凍儀-立式產品說明 Product description
恒溫解凍儀，隔水式恒溫解凍儀：是將漿袋放在融漿水囊與水囊之間，按啟動鍵后，熱水自動注入水袋內，進行循環融漿。使漿袋在融化過程中始終不接觸水，保持真正意義上的干式融漿。整個流程都是全自動智能電腦控制,自動調溫，自動加水處理.干式隔水膜袋使用科研綠色新型材料制成，無任何耗材、無限使用壽命長。
干式恒溫解凍儀-立式應用范圍 Application range
適用于科研中心，臨床輸科、醫院、制品生產單位，醫學實驗室，全自動處理，無需人工值守,自動完成工序,為使用快速節省了時間，方便了醫務工作者，是理想的配套工具。節能減排、節約水資源；融漿過程不使用一次性塑料袋包裹漿袋，保護環境減少污染。
上海旌派干式恒溫解凍儀恒溫解凍儀-立式主要特征 Principal character
1、樣品容量：8、12、16、20、24袋
2、微電腦全程控制，雙金屬片兩級溫控系統，超溫自動報警并切斷電源多重視聽報警系統，待機、融化等工作模式。 顯示器實時顯示數字水溫度和融化時間
3、全自動自動調節溫度,自動加水處理,自動定時設置時間,到達時報警提示。干式隔水膜袋是使用科研綠色新型材料制成，無毒味,無限使用壽命長.
4、全自動加熱是由自動測溫器、溫度傳感器、傳感電纜和高效加熱組成，加熱精度高于±0.5,融化使用專門設計的的“水循環”系統，避免血漿內纖維蛋白析出
5、自動水位檢測：自動加水處理,如沒有連接水管,低水位時自動報警，并且自動停止加熱,防止干燒。
6、全自動調節溫度：30℃-45℃可任意調用,全自動智能溫度計進行校準。水溫度差不大于0.5℃，保證血漿的平均融化。水箱密封，長期不用換水,節約資源減輕換水負擔。
7、如有漿袋破裂因有隔水膜袋包裹，不會造成過量滲漏，污染水箱及環境.
上海旌派干式恒溫解凍儀干式恒溫解凍儀-立式技術參數 Technical parameter
型號： Jipad-4GL Jipad-6GL Jipad-8GL Jipad-10GL Jipad-12GL
樣式方式： 立式（操作使用更方便，不必放桌臺）
融化方式： 干式隔水融化（目前對融化有要求都是用干式隔水融化，不接觸樣品）。
融化溫度：30℃~45℃可任意調溫。
解凍時間：10~20分鐘（1欄可處理2袋100ml/200ml，-20℃，扁平袋）。
可調時間：1-99.5分鐘。
溫度控溫精度：±0.5。
加熱裝置：由自動測溫器、溫度傳感器、傳感電纜和高效加熱組成。
顯示屏：數字顯示水溫和所剩下的融化時間。
電源：220V/50HZ。
功率：1800W。
振動方式：循環式。循環泵流量：15L
控制系統：微電腦全程控制，多重視聽蜂鳴提示系統，待機、融化等工作模式。
定時報警：設置時間到達時蜂鳴提示。
水位檢測：低水位時自動蜂鳴提示，并且自動停止加熱。
溫度校準：用標準溫度計進行校準。
干式恒溫解凍儀-立式型號選擇 Model selection
多功能恒溫解凍儀由于在低溫冰凍過程中脆性增強及運輸周轉等因素，容易造成不同程度破壞滲漏。由于破壞程度不同，滲漏程度也不相同。破損較大使滲漏明顯時，用肉眼觀察及擦式或擠壓等方法即可查出。有破損微孔時，因血漿黏稠度高而不會滲出，加之外部被水侵泡后的潮濕使肉眼觀察和其他檢查難以分辨。此時若用水浸泡方法融化血漿時，在血漿滲透壓和周圍水的壓力下使含有致病菌及各種病毒污水易滲入內造成血漿污染。為減少輸血反應，保障輸血安全，作者經過研究，用干式法與濕式法進行了血漿融化比較。
多功能恒溫解凍儀：內置循環小囊，全封閉干燥式解凍，不會有污水從肉眼很難發現的破損滲入內。如有微漏，在干燥表面也能發現。直接用水浸泡含有致病菌和病毒的污水易從的微破損處滲入袋內，由于袋外水分較多，較難發現。
干式解凍后外表面干燥、標簽清晰、無脫落。濕式解凍后血漿外表面潮濕因擦拭而易造成粘連、模糊、標簽易脫落。干式解凍融漿箱易清潔、易**。而水溫箱，不易清潔及**。溫水還容易滋長大量**。干式法外表面及操作臺干燥清潔，無污水滴濺對周邊環境無污染。而濕式法，從水中撈出時，會有大量**、污水到處滴濺，造成操作臺和周邊環境污染。
多功能恒溫解凍儀無需換水，節約水源，溫度恒定，并且是智能控制操作又簡單。而濕式法，水浴還需經常換水，造成水源浪費及污水污染環境。
目前國內許多醫院都在使用直接水浴溫式融漿。將直接放入水中浸泡解凍，從水中很容易使病原性微生物造成血液污染。有人報道輸新鮮冰凍血漿后發生不佳反應率占1.7%，還有報道[1]輸血漿反應率為2.9%，我院輸新鮮冰凍血漿發生反應率為1.1%，2008年后減至0.58%。在上述反應中，是否與新鮮冰凍血漿融解方式不同使反應率增加之故，很值得人們高度關注。
盡管多功能恒溫解凍儀優點多但是也存在缺點，融漿時間比濕式法要長10分鐘，其融漿箱內保溫設施還需進一步完善。
綜上所述，認為干式法明顯優于濕式法。為了保障輸血安全，早日杜絕輸血安全隱患，建議用干式法代替濕式法。
上海旌派是研發，生產，銷售，服務于一體的，是中國實驗室設備的主要單位。上海旌派是中國儀器儀表協會、分析儀器協會、工業自動化儀表協會、熱處理協會會員。
上海旌派干式恒溫解凍儀
Current thermostat (vertical) specifications: 4 blue, 6 blue, 8 blue, 10 blue, 12 Blue model: Jipad-4GL Jipad-6GL Jipad-8GL Jipad-10GL Jipad-12GL
Dry constant temperature thawing instrument - vertical product description Product description
Thermostatic defrosting apparatus, water isolation type constant temperature thawing meter is the slurry bag in the bag and the water sac between the melting water, press the start button, the hot water in the water bag automatic injection, cyclic pulping. In the process of melting, the slurry will not be exposed to water, and the dry thawing of the slurry is kept in the true sense. The whole process is fully automatic intelligent computer control, automatic temperature regulation, automatic water treatment. Dry diaphragm membrane bag is made of medical green new material, without any consumables and unlimited service life.
Dry constant temperature thawing instrument - vertical application range Application range
It is suitable for medical centers, clinical departments, hospitals, products production units, medical laboratories, automatic processing, no need for manual duty, and automatic completion of processes. It is an ideal supporting tool for saving time and convenience for medical workers. Energy conservation and reduction of water and water resources; the process of melting without using disposable plastic bags to wrap the pulp bags to protect the environment and reduce pollution.
Constant temperature thawing instrument - vertical main feature Principal character
1. Sample volume: 8, 12, 16, 20, 24 bags
2, microcomputer whole process control, bimetallic two level temperature control system, over temperature automatic alarm, and cut off power supply multiple audio-visual alarm system, standby and melting mode. Display of digital water temperature and thawing time in real time
3, automatic automatic adjustment of temperature, automatic water processing, automatic timing set time, alarm prompt when the arrival. Dry water membrane bag is made of new medical green materials with nontoxic taste and long service life.
4, automatic heating is made up of an automatic thermometer, a temperature sensor, a sensing cable and an efficient heating. The heating accuracy is over 0.5, and the specially designed water circulation system is melted away to avoid fibrin exhalation in the plasma.
5, automatic water level detection: automatic water processing, such as no connection pipe, low water level automatic alarm, and automatic stop heating, prevent dry burning.
6, the full automatic adjustment temperature: 30 C -45 C can be arbitrarily called, automatic intelligent thermometer calibration. The temperature difference of water is not more than 0.5 degrees C, which ensures the average melting of plasma. The water tank is sealed for a long time without changing water, saving the resources to reduce the burden of water exchange.
7, if the rupture of a slurry bag is wrapped in a membrane bag, it will not cause excessive leakage and pollute the water tank and the environment.
Dry constant temperature thawing instrument - vertical technical parameter Technical parameter
Model: Jipad-4GL Jipad-6GL Jipad-8GL Jipad-10GL Jipad-12GL
Style: vertical (easier to operate, no need to put a table)
Melting method: dry type water separation (current melting is required to melt with dry water isolation, no contact with the sample).
Melting temperature: 30 C ~45 C can be tempered at any time.
Thawing time: 10~20 minutes (1 columns can handle 2 bags of 100ml/200ml, -20 centigrade, flat bag).
Adjustable time: 1-99.5 minutes.
Temperature control accuracy: + 0.5.
Heating device: it consists of an automatic thermometer, a temperature sensor, a sensing cable and a high efficiency heating.
Display: the number shows the temperature of the water and the remaining time of melting.
Power: 220V/50HZ.
Power: 1800W.
Vibration mode: cycle type. Circulating pump flow: 15L
Control system: the whole process control of microcomputers, multiple audio-visual honeybee cue system, standby mode and melting mode.
Timing alarm: setting the time to arrive when the beep is prompted.
Water level detection: automatically hints at low water level and automatically stops heating.
Temperature calibration: calibrated with a standard thermometer.
Dry type thermostat - vertical model selection Model selection
The multifunction constant temperature thawing apparatus can easily destroy the leakage of the plasma bag because of its brittleness enhancement and transport turnover during the cryogenic freezing process. Because of the different degree of damage, the degree of leakage is different. When the breakage is more obvious than the ambassador's leakage, it can be found by means of naked eye observation, rubbing or extrusion. When there are damaged micropores, the plasma will not exudate because of the high plasma viscosity. Besides, the moisture outside the plasma bags will be difficult to distinguish from naked eye observation and other examinations. At this time, if water is used to soak the plasma, the plasma and osmotic pressure and the pressure of water around the plasma bag will make the pathogenic bacteria and all kinds of virus sewage permeate into the plasma bag and cause plasma contamination. In order to reduce the blood transfusion reaction and ensure the safety of blood transfusion, the author has carried out the comparison of plasma melting with dry and wet methods.
Multi-function constant temperature thawing apparatus: built-in circulating small capsule, completely closed dry thawing, no sewage from the naked eye found breakage into the plasma bag. If there is a micro leak, it can also be found on the dry surface. The wastewater containing pathogenic bacteria and viruses in direct water is easily infiltrated into the bag from the micro breakage of the plasma bag. It is difficult to find the water in the bag because of the more water outside the bag.
After dry thawing, the outer surface of the plasma bag was dry, clear and no shedding. After wet thawing, the moisture of the plasma surface is easy to cause adhesion, blurred and easy to fall off because of the wet surface of the plasma. Dry thawing thawing box is easy to clean and easy to disinfect. And the water temperature box is not easy to clean and disinfect. Warm water can also easily grow a large number of bacteria. Dry blood plasma bag surface and operating table are dry and clean, no sewage splash on the surrounding environment pollution. While the wet method, when the plasma bag is removed from the water, there will be a large number of bacteria and sewage splashing around, resulting in the pollution of the operating table and the surrounding environment.
The multi-function constant temperature thawing instrument needs no water exchange, water conservation, constant temperature, and intelligent control operation is simple.
