供應HP35665A 動態信號分析儀 / 音頻頻譜分析儀 / 音頻掃頻儀
生產廠家: 惠普/安捷倫
具有內置信號源的通用FFT分析儀，適用于常見的頻譜和網絡分析，以及倍頻程、階次與關聯分析。內置信號源具有可選的分析特性，可以優化分析儀的性能，以便對噪聲、振動和聲學問題進行分析和故障診斷，評測并解決旋轉機械問題，以及表征控制系統參數。
多種測試方法
快速傅立葉變換、擺動正弦測試、聲頻分析、次序分析、相關分析、頻率直方圖/時間測試等，并具有測試結果加工功能，能使機器對信號的處理達到一定的高度及深度。
- 測量結果：時間記錄、線性譜、功率譜、功率密度、頻率響應、相關、自動/互相關、正態分布、PDF，CDF。
- 顯示類型：單圖、雙圖、兩條曲線同圖顯示、狀態及水流圖顯示。
- 更新速度：8條曲線/秒
應用范圍
- 時域、頻域及幅值域測量
- 振動及噪聲分析
- 控制系統測試及分析
頻率
- 頻率范圍
單通道模式(CH1): 102.4 kHz
雙通道模式(CH1 & CH2): 51.2 kHz - 分辨力
100, 200, 400 or 800 lines resolution
Frequency resolution = frequency span/number of lines resolution - *小頻率分辨率
單通道模式: 244 uHz
雙通道模式: 122 uHz - SPANS
單通道模式: 102.4 kHz to 0.19531 Hz
雙通道模式: 51.2 kHz to 0.097656 Hz - 精度 ±30 ppm
Real Time Bandwidth
Fast Average On: >=12.8 kHz - 測量率
401 point FFT display, fast average on
One Channel mode: >=33 averages/second (typical)
Two channel mode: >=15 averages/second (typical) - 顯示刷新率: >=8 updates/second (typical)
401 point FFT display, fast average off
幅度 / 相位
- 輸入范圍 (full scale): +27 dBVrms (31.7 Vpk) to -51 dBVrms (3.99 mVpk) in 2 dB steps
幅度分辨力: 0.016% of full scale (typical) - 優良值幅度精度: ±2.92% (0.25 dB) of reading ; ±0.025% of full scale
- CROSS-CHANNEL 增益精度
Source = Full scale: ±0.04dB
Source = -20dB full scale: ±0.08dB - CROSS-CHANNEL 相位精度
Source = full scale: ±0.5 deg
Source = -20 dB full scale: ±0.5 deg
動態范圍
- FULL SPAN FFT NOISE FLOOR
Input Range 27 to -35 dBVrms: <-76 dBfs (-85 dBfs typical)
Input Range -37 to -51 dBVrms: <(-112 - Range) dBfs - SPURIOUS FREE DYNAMIC RANGE: <-72 dBfs
(Includes Spurs, Harmonic Distortion, Intermodulation Distortion, Alias Products) - Zoom Mode Alias Responses
1.5% to 98.5% of the Frequency Span: <-72 dBfs
Lower and Upper 1.5% of Frequency Span: <-65 dBfs - 輸入噪聲電平
Above 1280 Hz: <-140 dBVrms / (Sq. R)Hz
160 Hz to 1.28 kHz (6.4kHz span): <-130 dBVrms / (Sq. R)Hz
輸入
- INPUT RANGES: -51 dBVrms to +27 dBVrms
- INPUT IMPEDANCE: 1M ohm ±30% ; < or = 100 pico Farad
- Low Side to Chassis Impedance
Floating Mode: 1M ohm ±30% (typical)
<0.01 micro Farad (typical) - AC COUPLING: <3 dB Rolloff at 1Hz
- COMMON MODE REJECTION
-51 dBvVrms to -11 dBvVrms Ranges: >80 dB (typical)
-9 dBVvrms to +9 dBVrms Ranges: >60 dB (typical)
+11 dBvVrms to +27 dBVrms Ranges >40 dB (typical) - COMMON MODE RANGE (floating mode): ±4 V pk
- IEPE SIGNAL CONDITIONING
Current Source: 4.25 ±1.5 mA
Open Circuit voltage: +26 to +32 Vdc
The Agilent 35665A is a 2-channel Dynamic Signal Analyzer providing measurement solutions in vibration, acoustics, and control systems. Its major options are computed order tracking, real-time octave, swept sine, curve fit and synthesis, arbitrary source, and Instrument BASIC.
Features
- 1-channel at 102.4 kHz, 2 channels at 51.2 kHz.
- 100, 200, 400, 800 lines of resolution.
- Tachometer input.
- Built in 3.5" floppy disk.
- Source: Random, burst random, pink noise, sine, swept-sine, arbitrary, periodic chirp, burst chirp.
- 3.2 M Sample time-capture buffer (optional).
- Measurements: linear spectrum, cross-spectrum, power spectral density, frequency response, time waveform, auto-correlation, cross-correlation, histogram, PDF, CDF.
- Optional real-time octave, computed order tracking, swept-sine, curve fit, synthesis, and arbitrary source.
Options
- Opt 1D0 Computed Order Tracking Measurements
- Opt 1D1 Real-Time Octave Measurements
- Opt 1D2 Swept-Sine Measurements
- Opt 1D3 Curve Fit/Synthesis
- Opt 1D4 Arbitary Waveform Source
- Opt 1C2 HP Instrument BASIC
- Opt 1C1 Add 2MB Memory
- Opt ANA Add 6MB Memory
