New oil products grade analyzer is manufactured on the basis of advanced high precision microprocessor. the instrument can be used together with a PC a laptop through USB interface. Analyzer uses automatic computer-based calibration, saving measured data in the instrument memory with analysis date and time followed by their transfer to the PC (in Microsoft Excel or txt format). The instrument has easy of control attrition and aggressive environments resistive 8-key antiglare keyboard (made in Germany).
新的石油產品分析器是在高級的、高精度的微處理器的基礎上生產出來的。儀器可以與筆記本通過USB界面連接起來使用。分析器使用自動的、基于電腦的校準，將帶有分析日期和時間的測量數據儲存在儀器內存中，隨后轉移到電腦上（在微軟 Excel 或txt 表格中）。儀器很容易地控制磨損和侵蝕性的環境，具有電阻的八鍵防反光鍵盤（德國制造）。
Analyzer SX-300 has a distinctive characteristic, an additional sensor, which measures oil products volume resistivity with high precision. Therefore, fuel analysis may be based on two values, which allows measuring octane number of petrols with ferriferous (ferrocene), nickel and manganese additives, and to determine other substances content.
SX-300 分析器具有明顯的特點，它有附加的傳感器，可以高精度地測量石油產品容量的電阻率。因此，燃料分析基于兩個數值，這樣可以允許測量含鐵（二茂鐵）、鎳和錳等添加劑的石油甲烷數量，來確定其它物質的容量。
By using this measurement principle the instrument allows to determine: 通過使用這種測量原則，儀器允許確定：
contamination content in oil products; 石油產品中的污染容量
pour-point depressants content in diesel fuel; 柴油燃料中的降凝劑容量
engine oil base number; 機油基數
oil products volume resistivity. 石油產品容量電阻率
When determining petrol breakdown time, the petrol brａnd is selected in the instrument. The instrument switches to corresponding operating mode. Oxidative stability determination complies with GOST 4039-88 (ASTM D 525)
當確定汽油故障時間時，汽油商標會被選擇在儀器上。儀器啟動為相應的操作模式。氧化穩定性的確定符合GOST 4039-88 (ASTM D 525)
Motor oil brａnd identification is based on the permittivity determination principle. Genuine motor oils have certain value for this characteristic. Leading manufacturers’ oil brands are included into the instrument database (the database can be renewed or changed).
發動機油商標的辨識基于電容率確定原則。真正的發動機油對這項特征有特定的值。制造商的石油商標包含在了儀器的數據庫中（數據庫可以更新或改變）。
Water-in-oil percentage of oil and oil products is determined in compliance with GOST 14203-69 (Dielectric humidity measuring method). This allows using the instrument as a dielectric moisture indicator for oil products.
石油或石油產品中含水的比率是按照GOST 14203-69 確定的（電介質濕度測量法），這可以允許在石油產品中將儀器作為電介質濕度指示器來使用。
The instrument uses the timer microchip, which allows storing measurement results with analysis date and time. These data can also be transmitted to the computer.
儀器使用計時器微芯片，這樣就能允許儲存的測量數據導出后帶有分析的日期和時間，這些數據同樣可以被傳到電腦上。
New computer software is included into the set.
新的電腦軟件也被包含在組件中。
- measurement results are reflected on computer screen in convenient form;
測量結果會以簡易表格的方式反映在電腦屏幕上。
Instrument capabilities:儀器特性:
Determining octane numbers for motor petrols. Complies with ASTM D 2699-86, ASTM D 2700-86.
確定機動汽油的甲烷數量，符合ASTM D 2699-86, ASTM D 2700-86。
Determining cetane numbers for diesel. Complies with ASTM D 4737-03, ASTM D 613, EN ISO 5165.
確定柴油的十六烷數量，符合ASTM D 4737-03, ASTM D 613, EN ISO 5165。
Determining water-in-oil percentage of oil and oil products. Complies with GOST 14203-69 Oil and oil products. Dielectric humidity measuring method.
確定石油或石油產品中含水的比率，符合GOST 14203-69石油和石油產品。電介質濕度測量法。
Determining solidification temperature and diesel fuel type.
確定凝固溫度和柴油燃料的類型。
Content of antiknock compounds boosting the octane number of petrols.
增加汽油甲烷數量的防爆混合物的容量。
Content of pour-point depressants for diesel fuels.
柴油燃料降凝劑的容量。
Content of kerosine in diesel fuel.
柴油燃料中煤油的容量。
Petrol breakdown time (oxidative stability). Complies with ASTM D 525.
汽油故障的時間（氧化的穩定性），符合ASTM D 525。
Loss angle tangent of circuit-breaker, machine and engine oil.
斷路器油、機油、發動機油的損耗角正切值。
Level of engine, machine and circuit-breaker oil clarity.
機油、發動機油、斷路器油透明水平。
Manufacturer, engine oil brand.
制造商，發動機油商標。
Engine oil base number.
機油基數。
Dielectric permeability of oil products. 石油產品的電介質透磁率。
Oil products volume resistivity. 石油產品容量電阻率。
Determining the mechanical impurities content in oil products. 確定石油產品中機械雜質的容量。
Determining water-in-oil percentage of oil and oil products. Complies with GOST 14203-69 Oil and oil products. Dielectric humidity measuring method.
確定石油或石油產品中含水的比率，符合GOST 14203-69石油和石油產品。電介質濕度測量法。
Technical characteristics技術特征
| Parameter description 參數描述 | Measurement units | Value |
| Measured petrols octane numbers range 測量的汽油甲烷數量范圍 | ON | 40–125 |
| Acceptable limit of octane number measurement basic error, max 甲烷數量測量基本錯誤可接受的限度，值 | ON | ± 0.5 |
| Limit of acceptable difference between parallel octane number measurements, max 平行的甲烷數量測量之間可接受的差異限度，值 | ON | ± 0.2 |
| The determination range of antiknock additives content in petrols 汽油中防爆添加劑容量的確定范圍 | % | 0.5-15 |
| Acceptable basic error limit of antiknock additives content determination in petrols 汽油中防爆添加劑容量的確定基本錯誤可接受的限度 | % | 0.1 |
| Petrol oxidation breakdown time measurement range 汽油氧化故障時間測量范圍 | min. | 50-2400 |
| Acceptable basic error limit of petrol oxidation breakdown time 汽油氧化故障時間基本錯誤可接受的限度 | % | 5 |
| Petrol quality determination mode basing on volume resistivity 基于容量電阻率的石油質量確定模式 | Om | 10 6-10 14 |
| Acceptable basic error limit of volume resistivity measurements 容量電阻率測量的基本錯誤可接受的限度 | % | 3 |
| Cetane numbers measurement range 十六烷數量測量范圍 | CN | 20–100 |
| Acceptable basic error limit of cetane numbers, max 十六烷數量基本錯誤可接受的限度，值 | CN | ±1.0 |
| Acceptable difference limit between cetane numbers parallel measurements, max 十六烷數量的平行測量之間可接受的差異限度，值 | CN | ± 0.5 |
| Acceptable error limit when determining diesel-fuel pour point 確定柴油燃料降凝時可接受的錯誤限度 | C o | ± 2 |
| Kerosine content determination range in diesel fuels 在柴油燃料中煤油容量的確定 | % | 0-95 |
| Mode for pour point depressants content determination for diesel fuel 柴油燃料降凝劑容量確定的模式 | % | 3 |
| Acceptable basic error limit when determining kerosene content in diesel fuels 確定柴油燃料中煤油容量時可接受的基本錯誤限度 | % | 0.2-1 |
| Acceptable basic error limit when determining of pour point depressants content 確定降凝劑容量時可接受的基本錯誤限度 | % | 0.01 |
| Motor oils clarity level measurement range 發動機油透明水平測量范圍 | % | 95-100 |
| Acceptable error limit of motor oils clarity level measurement 發動機油透明水平測量可接受的基本錯誤限度 | % | 0.1 |
| Acceptable difference limit between motor oils clarity parallel measurements 發動機油透明平行測量之間可接受的差異限度 | % | 0.01 |
| POL dielectric permeability measurement range POL電介質透磁率測量范圍 | Unit | 1–5 |
| Acceptable error limit of dielectric permeability measurement, max 電介質透磁率測量可接受的基本錯誤限度，值 | Unit | 0.001 |
| Acceptable difference limit between POL dielectric permeability parallel measurements, max 電介質透磁率平行測量之間可接受的差異限度，值 | Unit | 0.001 |
| Oils base number determination range 石油基數確定范圍 | Unit | 0-24 |
| Acceptable basic error limit when determining oils basic number 確定石油基數可接受的基本錯誤限度 | BN unit | 1 |
| Motor oils manufacturer and brａnd determination 發動機油制造商和商標確定 | Manufacturer | - |
| Circuit-breaker oils (dielectrics) breakdown voltage measurement range 斷路器油（電介質）故障電壓測量范圍 | kV | 5–100 |
| Acceptable error limit of circuit-breaker oils breakdown voltage measurement, max 斷路器油故障電壓測量可接受的基本錯誤限度，值 | kV | 1 |
| Acceptable difference limit between circuit-breaker oils breakdown time parallel measurements, max 斷路器油故障時間平行測量之間可接受的差異限度，值 | kV | 0.2 |
| Measurement range of circuit-breaker oils loss angle tangen 斷路器油損耗角正切值的測量范圍 | % | 0.01–40 |
| Acceptable error limit of circuit-breaker oils loss angle tangent, max 斷路器油損耗角正切值的測量可接受的基本錯誤限度，值 | % | 0.01 |
| Acceptable difference limit between circuit-breaker oils loss angle tangent parallel measurements, max 斷路器油損耗角正切值的平行測量之間可接受的差異限度，值 | Unit | 0.001 |
| Determination range for mechanical impurities content in oil products 確定石油產品中機械雜質的容量范圍 | % | 97-100 |
| Acceptable basic error limit when determining mechanical impurities content in oil products 在確定石油產品中機械雜質的容量范圍時可接受的基本錯誤限度 | % | 0.01 |
| Water-in-oil content determination range for oil products 石油產中含水的比率范圍 | % | 0-30 |
| Acceptable basic error limit when determining water-in-oil content of oil products 在確定石油產品中含水的比率時可接受的基本錯誤限度 | % | 1 |
| Measurement time 測量時間 | s | 1–5 |
| Insufficient power supply indication operation threshold 能量提供不足指示操作的極限值 | V | 5.4 |
| Instrument useful life 儀器的使用壽命 | years | 6 |
| Overall dimensions of: 總容積 | ||
| electronic module 電子組件 | mm | 100х210х40 |
| sensor #1 and #2: 傳感器#1 和 #2 | mm | 60х100 |
| Instrument mass with one sensor/two sensors 儀器群帶有一個或者兩個傳感器 | gr | 850 |
Delivery package: 整套儀器包括以下部件：
Electronic computing module 電子計算組件
Detector #1 檢測器#1
Detector #2 檢測器#2
Sample imitator for detector #1 檢測器#1的樣本模擬器
Software disk 軟件磁盤
mini-USB cable 迷你USB電纜
Operations manual 操作指南
Certification 認證
Warranty certificate 保修書
Tool canvas bag 工具帆布包
辛烷值/十六烷值分析儀SHATOX SX-300
０２９－８９２８１１１５
