品牌：安捷倫
主要技術指標
主要技術指標
* 300 kHz to 20 GHz frequency range
* 300千赫至20千兆赫的頻率范圍
* Standard 3.5 mm (f) connectors
*標準3.5毫米（氟）連接器
* Fast full 3- or 4-port calibration with a single connection
*快滿3或4端口與一個單一的連接校準
* NIST traceable accurate calibrations
* NIST標定
* Reduced connector wear
*減少接頭磨損
* USB interface for direct control with PNA and ENA series of network analyzers
*為PNA和ENA系列網絡分析儀直接控制USB接口
* Reliable solid-state switching
*可靠的固態開關
* Mixed 3.5 mm male/female connectors option available
主要描述
主要描述
The Agilent N4433A Microwave electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full three- or four-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable to mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
安捷倫n4433a微波電子校準（ECAL）模塊使矢量網絡分析儀校準快速、方便、準確。它是一種高精度，為你的矢量網絡分析儀的校準技術的單連接。執行一個完整的三或四端口校準只需要不到一半的時間，用它與機械CAL套件連接數。此外，校準的準確度是機械的方法相媲美。傳統的機械校準需要密集的運營商的互動，這是容易出現的錯誤。在瑞士，操作者只需連接Ecal模塊的網絡分析儀和軟件控制休息。
ECal modules are transfer standards capable of transferring the factory calibration accuracy to your network analyzer. The Agilent PNA and ENA series of network analyzers controls the N4433A module directly through a USB interface. PNA Series network analyzers require firmware revision 2.5 or higher.
ECAL模塊傳輸標準能夠轉移工廠到您的網絡分析儀的校準精度。網絡分析儀Agilent PNA和ENA系列控制n4433a模塊直接通過USB接口。PNA系列網絡分析儀需要固件版本2.5或更高。
