一、全自動凍融試驗箱概述：
全自動凍融試驗箱是混凝土檢測儀器，適用于混凝土、建筑磚塊、陶瓷磚、外墻砂漿及其它建材的凍融試驗，制冷壓縮機采用法國泰康節能、環保型渦旋式低溫壓縮機組，風機為無極調速，可根據環度可根據環境溫度從而改變風機的轉速。 整體性能穩定，全自動凍融試驗箱采用優質不銹鋼板，一體式結構，操作簡單方便。
I. Overview of full-automatic freeze-thaw test chamber:
Full-automatic freeze-thaw test box is a concrete testing instrument, which is suitable for freeze-thaw test of concrete, building bricks, ceramic tiles, exterior wall mortar and other building materials. The refrigeration compressor uses the energy-saving and environmentally-friendly scroll type imported from Taikang, France. For low-temperature compressors, the fan is steplessly adjustable, and the speed of the fan can be changed according to the ring degree and the ambient temperature. The overall performance is stable. The full-automatic freeze-thaw test box uses high-quality stainless steel plates with an integrated structure, which is simple and convenient to operate.
二、全自動凍融試驗箱符合標準：
GB/T3810-2006陶瓷磚抗凍性試驗方法
GB/T2542-2003砌墻磚試驗方法
GB/T4111-1997混凝土小型空心砌塊試驗方法
GB/T11973-1997加氣混凝土抗凍性試驗方法
JGJ/T70-2009砂漿抗凍性能試驗方法
GB/T11973-2006蒸汽加氣混凝土砌塊試驗方法
GB/T11968-2006混凝土小型空心砌塊試驗方法
GB/T241-1994巖石抗凍性試驗方法
Second, the fully automatic freeze-thaw test box meets the standards:
GB / T3810-2006 Test method for frost resistance of ceramic tiles
GB / T2542-2003 Test method for masonry bricks
GB / T4111-1997 Test method for small concrete hollow blocks
GB / T11973-1997 Test method for frost resistance of aerated concrete
JGJ / T70-2009 Test method for frost resistance of mortar
GB / T11973-2006 Test method for steam aerated concrete blocks
GB / T11968-2006 Test method for small concrete hollow blocks
GB / T241-1994 Test method for frost resistance of rocks
三、全自動陶瓷磚凍融試驗箱產品特點：
壓縮機、加熱部分、電源控制部分均采用進口件，高質量、高性能
滿載運轉時凍融箱內各點溫度極差不超過2℃
儀表自動控制，數據曲線實時動態顯示、試驗數據自動存儲，具有試驗意外終斷自動恢復功能
安裝方便，占地小，低噪音
Third, the automatic ceramic tile freeze-thaw test box product features:
The compressor, heating part and power control part are all imported parts, with high quality and high performance.
The temperature difference between each point in the freeze-thaw box is not more than 2 ℃ during full load operation.
Instrument automatic control, real-time dynamic display of data curve, automatic storage of test data, and automatic recovery of unexpected test termination
Easy installation, small footprint, low noise
四、全自動凍融試驗箱技術參數：
冷凝器冷卻方式 | 風冷 | 風冷 |
試件數量 | 16件 | 28件 |
試件尺寸 | 100×100×400，測溫件尺寸相同，中間留有測溫孔 | |
凍融循環周期 | 2.5～4小時，融化時間不小于1∕4凍融周期 | |
傳感器1：中溫度控制 | 5～-18±2℃ | |
傳感器2：液體溫度控制 | 液體溫度控制高溫控制：18～23℃ 低溫控制：-23～-18℃ | |
傳感器3：對角線溫度控制 | 對角線溫度監測箱體內溫度極差不超過2℃ | |
傳感器4：二次保護溫度控制 | 50℃～-30℃ | |
溫度記錄儀 | 數字顯示無紙記錄儀 | |
試件桶尺寸 | 120×120×500 | |
凍融循環介質 | －45℃防凍液 | |
凍融循環介質充注量 | 液面高于試塊10－15毫米 | |
制冷機壓縮機 | 全封閉 4HP | 全封閉5HP |
加熱功率 | 5kW | 6kW |
zui大運行功率 | 6kW | 7kW |
供電 | 3N380V 50Hz | 3N380V 50Hz |
外形尺寸 | 1900×800×1100 | 1900×1300×1100 |
重量 | 約400kg | 約500kg |
五、全自動凍融試驗箱使用方法：
試驗采用水凍水融法,把符合外觀要求的100×100×400的混凝土試件和測溫試件放進試件桶中,用17~23℃的水浸泡4天，然后把試件桶放入凍融試驗槽中，用循環的冷凍液對試件反復進行降溫和升溫，周期性地把試件內放的水進行凍結和融化。混凝土試件每做25次凍融循環試驗，都要測量1次重量和相對動彈性模量。當相對動彈性模量下降至初始值的60％或質量損失率達5％時，即認為試件已達破壞，并以相應的凍融循環次數作為該混凝土的抗凍等級。如果試件凍融至預定的循環次數，而相對動彈性模量或質量損失率均未達到上述指標，可認為試驗的混凝土抗凍性已滿足設計要求。根據凍融循環次數及相應的相對動彈性模量可計算出混凝土耐久性系數，供設計選材時參考。因此，在動彈性模量，質量損失率和耐久性系數為評定指標的混凝土抗凍試驗中。
Fifth, the use of automatic freeze-thaw test box:
The test adopts the water-freeze-thaw method, put the 100 × 100 × 400 concrete test pieces and temperature test pieces that meet the appearance requirements into the test piece bucket, soak it in water at 17 ~ 23 ℃ for 4 days, and then put the test piece bucket Put it into the freezing and thawing test tank, use the circulating freezing liquid to repeatedly reduce the temperature and increase the temperature of the test piece, and periodically freeze and thaw the water in the test piece. For every 25 freeze-thaw cycle tests on concrete specimens, the weight and relative dynamic elastic modulus must be measured once. When the relative dynamic elastic modulus drops to 60% of the initial value or the mass loss rate reaches 5%, it is considered that the test piece has reached damage, and the corresponding freeze-thaw cycle number is used as the freeze resistance level of the concrete. If the test piece is frozen and thawed to a predetermined number of cycles, and the relative dynamic elastic modulus or mass loss rate does not reach the above indicators, the frost resistance of the tested concrete can be considered to have met the design requirements. The durability coefficient of concrete can be calculated according to the number of freeze-thaw cycles and the corresponding relative dynamic elastic modulus for reference when designing and selecting materials. Therefore, in the concrete frost resistance test in which the dynamic elastic modulus, mass loss rate and durability coefficient are evaluated.
