BJ-Ⅱ崩解時限儀
崩解時限儀是依據《中國藥典》對片劑、膠囊劑、及丸劑進行崩解時限檢測的藥檢儀器。
技術指標:
△ 溫度預制范圍：室溫～50℃,顯示顯示分辨率為0.1℃。
△ 溫度控制精度：±0.3℃
△ 定時預制范圍：1min～900min
△ 時間控制精度：±0.5min
△ 工作噪聲：＜60db
△ 升降吊籃數量：2套
△ 吊籃升降頻率：（30～31）次/分
△ 吊籃升降距離：（55±1）mm
△ 篩網至杯底最小間距：25mm±2mm
△ 篩網孔徑：標配2mm、（0.425mm、1mm孔徑可選定）
△ 電 源：220V50Hz
△ 整機功率：600W
△ 外形尺寸：長*寬*高 400mm*320mm*440mm
主要特點:
◎ 雙籃工作位系統測定崩解時限。
◎ 2套吊籃，可分別獨立進行崩解實驗。
◎ 電子溫度傳感器可顯示和監控水浴箱內各點及燒杯中的溫度。采用高精度數字電子傳感器，
無需校準即可保證水浴溫度的高精度和高準確度。
◎ 儀器自動控制水浴溫度為37.0℃（藥典規定）。并可隨時重新設定預置溫度。
◎ 儀器自動設定吊籃升降時間為15分鐘，也可任意重新設定。
◎ 采用單片機為核心的計算機控制技術，智能化控制水浴溫度、工作時間兩個性能參數。
◎ 儀器具有監控水浴溫度過熱報警和自動保護。
BJ-Ⅱ（譯）
BJ-Ⅱ Disintegration Time Limit Tester
Disintegration time limit tester is a drug test instrument to test the disintegration time limit of tablets,
capsules and pills in accordance with Chinese Pharmacopoeia.
Technical indexes:
△ Temperature prefabrication range: room temperature:～50℃, display resolution:0.1℃.
△ Temperature control accuracy: ±0.3℃
△ Timing prefabrication range: 1min～900min
△ Time control accuracy: ±0.5min
△ Work noise: ＜60db
△ Number of lifting baskets: 2 sets
△ Lifting frequency of basket: (30～31) times/min.
△ Lifting distance of basket: (55±1) mm
△ Minimum spacing from screen to beaker bottom: 25mm±2mm
△ Mesh size: standard configuration 2mm, (optional for 0.425mm and 1mm bore diameters)
△ Power supply：220V50Hz
△ Total power：600W
△ Overall dimensions：L*W*H 400mm*320mm*440mm
Main features:
◎ Double-basket working position system measures disintegration time limit.
◎ 2 sets of baskets, which can conduct independent disintegration experiment respectively.
◎ Electronic temperature sensor can display and monitor various points in water bath case and the temperature in the beaker. High-precision digital electronic sensor is adopted to ensure the high precision and high accuracy of water bath temperature without
the need for calibration.
◎ The instrument controls the bath temperature at 37.0℃ automatically (prescribed by Pharmacopeia).
It can also reset the preset temperature again at any time.
◎ The instrument sets the lifting time of baskets to be 15min automatically, which can also be reset at any time.
◎ It adopts the computer control technology which is centered on SCM to control two performance parameters
including bath temperature and working time intelligently.
◎ The instrument can monitor bath temperature, give over-temperature alarm and protect itself automatically.
