WHEATLEY® Check Valves止回閥由美盛科技中國有限公司供應
WHEATLEY® Check Valves止回閥自 1916 年以來是在流量控制行業的***。正文設計*大流量區壓力損失減到*小和*大程度減少安裝空間和時間
WHEATLEY® Check Valves止回閥
WHEATLEY® Check Valves止回閥由美盛科技中國有限公司供應
WHEATLEY® Check Valves止回閥自 1916 年以來是在流量控制行業的***。正文設計*大流量區壓力損失減到*小和*大程度減少安裝空間和時間
Valves - WHEATLEY Dual Plate Wafer Check Valve
設計特點
惠特利的車身設計提供了以下功能：
• 緊湊晶圓一體式的設計風格
• 中心職位*支持沒有外部的內部程序集
針腳或插頭
• 由于惠特利，確保無滲漏到 atmoshere 的標準
它消除了通過孔和管道的設計插頭在正文中
• *大流通面積減到*小的壓力損失
• *大程度減少安裝空間和時間
雙板設計生產*大強度的*低開啟和關閉時間
夾緊板提供額外的閥板的強度和允許密封件可以方便地更改
專門設計的平面、 完整的聯系密封件保持積極關閉在低工作壓力。與大多數其他閥門，不同的是這些封印很容易被取代在字段中
扭轉彈簧協助防止流逆轉的閥板封閉。一致閥門的反應可確保針對砰和水擊
重型耐腐蝕建設軸
軸支持作為停止以防止閥板的旅行。耐腐蝕與大軸軸承表面。輕松地可移動內部裝配、 維修或更改
Valves - TOM WHEATLEY Piston Check Valves
Standard Features
• Size range: 2 in. through 12 in.
• ANSI Classes:150 - 1500
• Full open / top mounted piston check valve
• Controlled clapper movement on full opening piston check valves
• Horizontal or Vertical service
• Metal-to-Metal seats
• Quick opening of piston
• RF or RTJ end connections
Optional Features
• Integral or removable seat
• Metal overlays
Body Construction
• Carbon Steel Body, Cover and Trim.
Valves - WHEATLEY Short Pattern Wafer Check Valve
Inexpensive Reduced Port Check Valves are used in applications where...
• Media is clean (abrasives are not present)
• Flow is steady and not pulsating
• Flow rates are low
• Pigs or spheres are not intended to run through the valve
• Velocity through the seat does not exceed:
Liquids 15 feet per second
Gases 100 feet per second
Valves - WHEATLEY Series 500 Fire Tested Carbon Steel Flanged End Check Valve
API 6D/Drilling production valve carbon steel flanged end check valves
When you need a check valve that has to work!
Features:
• 316 stainless steel trim is compatible with a broad range of
media and operating conditions
• Full-Open, through-conduit design for low pressure drop and
less turbulence.Valves easily pass pigs and spheres
• 90 Durometer, peroxide-cured seals are compatible with a
broad range of media and operating conditions. Seals provide
a bubble-tight shut-off every time
• Suitable for vertical flow up or horizontal installation.
Eliminates installation guesswork
• All materials conform to NACE MR0175 / ISO 15156
• Cast on flanges provide greater valve body integrity and
fewer leak points
• API 6D Monogram (510 / 511 Only)
| API 6D/Drilling production valve carbon steel flanged end check valves Features: |
• Valve is fire tested to API 6FD requirements (except for 1 in. (25 mm) valve)
• CANADIAN REGISTRATION NUMBER (CRN) available upon request
• Flanges are back-faced - an extra manufacturing step which provides smoother bolting surfaces and
even bolt loading
• Bolted top entry complete with 1/2 in. NPT cover tap for gauges and accessories (except 1 in. (25 mm) size)
• In-line repairable
• Thru-pin clapper shaft makes clapper removal easier and extends valve life by transferring wear and tear to
an inexpensive replaceable part.
Valves - WHEATLEY Series 822 Check Valve
WHEATLEY® Series 822 Check Valves
When you need a check valve that has to work!
Features:
• Designed in Accordance with ASME B16.34 (WCC, LCC and
CF8M only)
• Material of construction conform to NACE MR0175 / ISO 15156
• Solid 316 stainless steel clapper and hanger which eliminates the
need for seperate pins, bushings and rollers
• Compact valve geometry minimizes weight and space
• Bevelled, self-aligning clapper and seat design incorporates
a molded seal in the clapper for a bubble-tight primary and
metal-to-metal secondary seal
• Peroxide-cured Buna-N (FKM & HNBR optional) Seals
• Generous wrench area on body and hex-head threaded cover for
easier installation and maintenance
• Full opening
• Suitable for horizontal or vertical flow up
• Below-the-threads cover seal isolates the cover threads from
line media
• Metal Nameplate
