美國*Monroe 平板式靜電測量儀
產品詳情
兩種操作模式，適用所有離子設備：
1.對于直流脈沖離子設備，使用峰值（放電）模式，通過充電板的感應讀取并掌握峰值電壓及極性（正或負）以監測電壓擺動。
2.對于室內臺式離子設備，層流凈化罩，離子風槍及風嘴，使用正常模式，來檢測靜電消散時間及離子平衡度。
檢測防靜電設備是否正常工作
防靜電手腕帶，工作臺，防靜電地板- 檢測其
美國*Monroe 平板式靜電測量儀
Monroe新產品 平板式離子靜電測試儀ME-300,功能同ME-268A,測試范圍為±1050 volts，*可以滿足離子風機測試使用
300 uses large, high-contrast,alpha/numeric LED displays for easy reading at any vieweing angle, even in highambient lighting conditions. Individual LED’s, provide additional operationstatus during testing and setup. Single-button operation of manual +decay,-decay and balance ensures simple, easy operation. Balance tests record ±peaksand average reading. Each test can be customized in setup for stop trip levelsand test duration. An automated set of tests can be initiated with a singlebutton depress.
Operation and setup can be done via a USBport and PC software in addition to the front panel buttons. Test results canalso be retreived for automatic or manual test.
Real time analysis of ionizers can be donevia the analog output.
美國*Monroe 平板式靜電測量儀
1 Measures, displays and stores last testdata, including discharge times, peak offset voltages, and average offsetvoltage.
2 Easiest, most reliable way to checkeffectiveness of all ionization-type static control systems
3 Meets Requirements of ANSI/ESD STM 3.1
4 Removable, cable-connected ioncollecting plate probe permits precise positioning and remote monitoring
5 Separate time and voltage displays fordischarge time test
6 Recorder output for permanent recordsand unattended operation
7 One range measures from 0 to ±1kV
8 SDramatically demonstrates inducedcharges and human body potential
9 AC and battery operation
10Perform long-term balance tests
Features:
? Measures, displays and stores last test
data, including discharge times, peak
offset voltages, and average offset
voltage.
? Easiest, most reliable way to check effectiveness ofall ionization-type static control systems
? Meets Requirements of ANSI/ESD
STM 3.1
? Removable, cable-connected ion
collecting plate probe permits precise
positioning and remote monitoring
? Separate time and voltage displays for discharge timetest
? Recorder output for permanent records and unattended operation
? One range measures from 0 to ±1kV
? Dramatically demonstrates induced charges and humanbody potential
? AC and battery operation
? Perform long-term balance tests
Specifications:
Charger: ±1050 volts, selectable polarity
Fieldmeter:Range: 0 to ±1300 volts on display 0 to ±1800volts analog output1 volt resolution
Accuracy: ±2% of reading ±2V + zero offset
Bandwidth: 6Hz
Analog output: 1/1000 of plate voltage, ±3%
Trip Points: Start Voltage: 1000 volts fixed StopVoltage: 10 to 990 volts in 1V steps
Charge Plate:Size: 6”x6” (15cm x 15cm)
Capacitance: 20pf, ±10%
Plate selfdischarge: Less than 100 volts within 5 minutes(< 60% R.H.)
Timer:Range: 0.1 sec to 999.9 sec Resolution: 0.1 sec Accuracy: 0.1 sec
PowerRequirements: 100 to 220 VAC nominal line voltage;less than 5 Watts.
Battery Life: >8 hours
Dimensions: Approx 6?”W x 8?”D x 6H”
Weight: Approx 5.2 lbs.
PROBES andACCESSORIES
MODLE DEscriptION
300/84 Carry Case
