全新美國* ADI DSP仿真器 ADZS-HPUSB-ICE?
支持ADI公司全系列JTAG處理器和DSP[Blackfin/SHARC/TigerSHARC全系列處理器，以及ADSP-219X系列和ADSP-2199X系列DSP]；
?USB全速接口，支持zui高1.5Mbps的下載速度；
?兼容VisualDSP++ 5.0/4.5/4.0/3.5集成開發環境；
?自動檢測處理器和
ADZS-HPUSB-ICE
全新美國* ADI DSP仿真器 ADZS-HPUSB-ICE
全新美國* ADI DSP仿真器 ADZS-HPUSB-ICE
【產品介紹】
ADZS-HPUSB-ICE為ADI公司出品的ADI DSP仿真器。作為ADI原廠仿真器中性能zui強的一款，HPUSB ICE能夠支持Blackfin、SHARC、TigerSHARC系列處理器，是目前ADI DSP客戶群中使用得的一款開發工具。
【功能參數】
- 支持ADI公司全系列JTAG處理器和DSP[Blackfin/SHARC/TigerSHARC全系列處理器，以及ADSP-219X系列和ADSP-2199X系列DSP]；
- USB全速接口，支持zui高1.5Mbps的下載速度；
- 兼容VisualDSP++ 5.0/4.5/4.0/3.5集成開發環境；
- 自動檢測處理器和DSP I/O電壓，兼容1.8V、2.5V、3.3V以及5V電壓；
- 支持多處理器仿真；
- 支持14腳JTAG連接器；
- 針對距離遠的目標平臺提供了3米長的USB電纜；
- 過驅動升級可支持未來ADI DSP系列處理器；
- 結構小巧簡潔，安裝簡單，運行穩定，可靠耐用。
【性能測試】
仿真器型號/測試環境 | ADZS-HPUSB ICE |
向SDRAM內FILL32M數據所需時間 | 38秒 |
向SDRAM內FILL32M文件所需時間 | 69秒 |
通過PPI采集SXGA圖像并在Visual DSP++5.0下還原圖像 | 59秒 |
通過PPI采集QVGA圖像并在Visual DSP++5.0下還原圖像 | 38秒 |
【產品配置】
序號 | 名稱 | 規格型號 | 單位 | 數量 | 原廠標配 |
1 | ADI DSP JTAG仿真器 | ADZS-HPUSB-ICE | 臺 | 1 | |
2 | USB線纜 | - | 條 | 1 | |
3 | 電源 | 5V、2A | 條 | 1 | |
4 | 電源接口 | 國標、歐標、美標 | 個 | 3 | |
5 | 文檔1 | HPUSB/USB ICE Release Note | 份 | 1 | |
6 | 文檔2 | EE-68 | 份 | 1 | |
7 | 文檔3 | EE-175 | 份 | 1 | |
8 | 文檔4 | Analog Devices DSP Collaborative | 張 | 1 | |
9 | ADI DSP開發軟件 | Visual DSP++5.0 | 套 | 1 | 贈 |
10 | 文檔5 | ADI仿真器使用注意事項 | 份 | 1 | |
11 | 保修卡 | 工具保修卡（2年保修） | 張 | 1 |
Analog Devices USB-Based Emulator and
High Performance USB-Based Emulator
USB-Based Emulator Key Features
- Full speed USB 1.1 interface enabling download speeds of up to 150 KB/sec
- Support for all ADI JTAG processors and DSPs
- Multiple processor and DSP I/O voltage support with automatic detection
- 1.8V, 2.5V, and 3.3V compliant and tolerant
- 5V tolerant and 3.3V compliant for 5V processors and DSPs
- Multiprocessor support
- 14-pin JTAG connector
- 3-meter USB cable for difficult-to-reach targets
- CE-certified
HP USB-Based Emulator Key Features
- High speed USB 2.0 interface enabling download speeds of up to 1.5 MB/sec
- Background emetry Channel (BTC) support enabling nonintrusive data exchange at up to 2.0 MB/sec
- Support for all ADI JTAG processors and DSPs
- Multiple processor and DSP I/O voltage support with automatic detection
- 1.8V, 2.5V, and 3.3V compliant and tolerant
- 5V tolerant and 3.3V compliant for 5V processors and DSPs
- Multiprocessor support
- JTAG clock operation up to 50 MHz
- 14-pin JTAG connector
- 3-meter USB cable for difficult-to-reach targets
- CE-certified
Overview
Analog Devices’ cost-effective Universal Serial Bus (USB)-based emulator and High Performance Universal Serial Bus (HP USB)-based emulator each provide an easy, portable, nonintrusive, target-based debugging solution for Analog Devices JTAG processors and DSPs. These powerful USB-based emulators perform a wide range of emulation functions, including single-step and full speed execution with pre-defined breakpoints, and viewing and/or altering of register and memory contents. With the ability to automatically detect and support multiple I/O voltages, the USB and HP USB emulators enable users to communicate with all of the Analog Devices JTAG processors and DSPs using either a full speed USB 1.1 or high speed USB 2.0 port on the host PC. Applications and data can easily and rapidly be tested and transferred between the emulators and the VisualDSP++™ development and debugging environment (available separay).
The plug-and-play architecture of USB allows the emulators to be automatically detected and configured by the host operating system. It can also be connected to and disconnected from the host without opening the PC or turning off the power to the PC. A 3-meter cable is included to connect the emulators to the host PC, thus providing abundant accessibility to hard-to-reach targets.
w w w . a n a l o g . c o m / p r o c e s s o r s / t o o l s
The HP USB emulator also supports the Background emetry Channel (BTC), a non-intrusive method for exchanging data between the host and target application without affecting the target system’s real-time characteristics.
CROSSCORE Development Tools
The USB-based and High Performance USB-based emulators are part of the Analog Devices CROSSCORE® Tools product line, which is composed of a comprehensive set of development tools providing engineers with easier and more robust methods for developing and optimizing systems.
The CROSSCORE components include:
- VisualDSP++ development and debugging environment
- EZ-KIT Lite™ evaluation kits
- Emulators
The easy-to-use VisualDSP++ integrated development environment speeds development, debugging, and deployment while shrinking product development cycles and improving time to market.
The EZ-KIT Lite evaluation kits provide an easy way to investigate the performance of Analog Devices’ family of embedded processors and DSPs.
Emulators are available for both PCI and USB host platforms for rapid on-chip debugging.
***************************************************
聯 系 人 ;雷 俊 （先 生）
深圳博瑞圖電子科技有限公司
0755-36675904
MOB:13823138950
0755-83244576
ADD:深圳市福田區中航路世紀匯都會軒1416室
: 401512450
網 址：www.szprotools。。ｃｏｍ
***************************************************
承接銷售元器件IC一條龍、專注10年
